EoW March 2010

wire

April 12 - 16

and micron digital display), and machine management through programmable and digital OPLC. Furthermore, on the IG 100A and IG 125A machines, the work-head angular motorisation, precise to 1/10 of degree, allows the OPLC to record the grinding steps of the rst die (bearing length, working cone, entry cone) and to recall and apply the steps so that all the following dies will be worked exactly the same without any operator intervention or any adjust- ment (apart from the wheel wear compensation). The IG 125A is streamlined and equipped with a cooling system to cool both the die and the grinding wheel. Therefore the ground surface nish is ner, the life of the wheel is longer and above all, it allows the use of speci c wheels that can polish tungsten carbide dies automatically. Agir Technologies – France Fax : +33 3 805 18136 Email : rivom@rivom.com Website : www.agir-technologies.com

CIQ 3.0 is complete and structured software for quality and production management in the electric cable and wire speci c industry. It o ers data capture, networking, use, export to ERP and archiving. AESA SA – Switzerland

AESA Cortaillod Stand: 10B38

AESA Cortaillod, specialists in electric cable metrology, will be launching new testers at the show. Lynx is a new manual RCKE tester combining design and e ciency. The man-machine interface is a touch screen, allowing the input of commands as well as the display of LF measurements acquired on pairs and quads at the intermediate test platform. Puma is a new automatic RCKE tester with connecting frames for measuring LF parameters on pairs and quads, subassemblies and small cables at the nal test platform. Gaia is a test system designed to automaticallymeasure the LFparameters on multi-pair cables, dielectric strength (high voltage) and insulation resistance. Phoenix DT is a compact model for the nal inspection of xDSL cables. In a limited space it incorporates the technology of LF measurement and HF up to 40MHz.

Fax : +41 32 842 4865 Website : www.aesa.ch

Agir Technologies Stand: 10A08-05

Agir Technologies will introduce its new IG range of six internal grinding machines, IG 80M, IG 80A, IG 100M, IG 100A, IG 125M and IG 125A, designed to simplify the work of the operator. These grinding machines have been totally rethought in order to simplify the operator‘s work. Built for reliability (hundreds of Agir machines are already operating on ve continents), rigidity (tables in steel and cast-iron), precision (brushless motor

➣➢➣

104

EuroWire – March 2010