EoW March 2010

wire

April 12 - 16

➣➢➣ In crash grinding of AISI 302 springs 13mm – wire 2mm the springs per dressing increases from 6,000 to 12,000. Camfart Srl – Italy

The installed power is therefore linked to the working solution, ranging from 300Kw, in case of electrical cascade, up to 1,500Kw for one-stroke welding. This system is mainly intended to meet the needs of medium and small companies, but also those of larger com- panies requiring a exible system of production, able to move quickly from one model to another. Unloading is completely automatic and this allows the user to foresee down-stream reworking operations, such us cutting, stacking, transport and galvanizing. Cemsa SpA – Italy

Fax : +39 0364 598986 Email : info@camfart.it Website : www.camfart.it

Cemsa SpA Stand: 16G23

GRG-JR-1000 welding machine

▲

and then, in a pilgrim-pitch magazine in a special housing, the cross wires are loaded. The magazine has a capacity of 20 cross wires, representing twenty strokes of the welding machine. The possibility of a higher automation level is also foreseen and can be obtained by the introduction of a vertical automatic magazine of higher capacity. The machine is available in di erent con gurations, depending on the trans- former electrical power management. The electrical power is chosen according to the working speed, the power available from the factory network and the required aesthetic results.

Cemsa will present its latest resistance welding machine, the GRG series, for the production of heavy steel grating panels. These are normally 6,000mm long, with steel cross wires of between 4mm and 7mm, for a width of 1,000mm. The grating panels are used for road fencing, drain wells, air intakes, stairs and gangways, and in industrial installations, such as re neries, power stations and o shore applications. The welding process of the GRG-JR-1000 welding machine is automatic, while loading is manual. The longitudinal bars are loaded onto the feeding table

Fax : +39 02 253 3307 Email : info@cemsa.it Website : www.cemsa.it

Cimteq Stand: 11D21

Cimteq will be unveiling the latest developments to CableBuilder at wire Düsseldorf.

112

EuroWire – March 2010