EoW March 2010

wire

April 12-16

Reduced energy consumption, low maintenance, operational exibility (the same drawing machine can produce a very wide range of nished wires), reduced wire breakings, low noise level, and other important bene ts of limited slip technology are therefore also available on multi-wire drawing machines. B630-F ”Four-Twist” bunching machine as “the most revolutionary equipment the company is presenting at wire.” Euroalpha describes its

Fil-Tec yarn in typical appplication

▲

metres per package for longer runs without a break and a more e cient stranding process. Fil-Tec Inc – USA Website : www. l-tec.com

Fortuna Federn GmbH Stand: 16D19

Euroalpha bunching machine

▲

New products from Fortuna Federn will include a 5-axis servo controlled WIM CNC lathe coiler for the production of all types of cylindrical springs and wire parts. WIM-12 CNC 5AX works with wire up to 12mm diameter, and WIM-20 CNC will handle up to 20mm diameter.

A patented dual-bow rotating group performs four twists for each revolution of the transmission shaft, while conven- tional bunchers perform only two. Productivity is therefore doubled at the same rpm, and energy consumption can be reduced by running the machine at a lower rpm.

Euroalpha Srl – Italy Fax : +39 0424 72780 Email : info@euroalpha.it Website : www.euroalpha.it

Fil-Tec Inc Stand: 9E52

Fortuna Federn’s new BEM-12 CNC machine

▲

BEM CNC is a new servo controlled machinery line for semi-automatic production of a wide range of bent parts. The BEM-12 CNC (up to 12mm diameter) machine will be seen at Düsseldorf for the very rst time. There will also be a new line of horizontal servo controlled spring end grinders suitable for grinding long compression springs. Model GRM-10 for wire up to 10mm diameter will represent the range at the show. Fortuna Federn GmbH – Austria Fax : +43 3465 3704 Email : info@fortunafedern.com Website : www.fortunafedern.com

Fil-Tec Inc will display its newest yarns, binders, blocking and lling products. New water swellable binder and core yarns (for wrapping around the FRP) o er the advantages of very low dust, extending the life of bearings and other moving equipment parts, causing less downtime for maintenance related to SAP dust problems and providing a cleaner working environment for the operator. Fil-Tec’s new binder o ers higher yield, so lower cost per kilometre of cable produced. It also produces a package that o ers excellent integrity and balance, can run at 5,000rpm without unwanted vibration and provides more

➣➢➣

125

EuroWire – March 2010