EoW March 2010

wire

April 12 - 16

for copper wire, the 3000A model. This annealer can be combined with any make of rod breakdown machine, due to its self-contained design and motorisation. It can be used to anneal copper wire in a diameter range from 1mm to 3.4mm, equipped with a 22kW AC motor with frequency control system.

medium-to-large diameter wire. The line consists of a hydraulic descaling group, followed by a pre-straightening unit, a cleaning machine with an abrasive belt, a steam washing machine, followed by a boraxing unit and an induction drying unit A new double-twist cabling machine • for steel ropes, equipped with payo s for large diameter spools and with a sensor unwinding braking control. The machine is designed for the production of ropes of up to 36 wires Comapac Wire Machinery will be exhibiting SAMP products and two new machine models, a double vertical spooler for the take-up of indented or smooth wire with a semi-automatic spool changeover and an automatic wire cut, and a new range of wet drawing machines for welding wire, o ered with the brand GCR Eurodraw/SAMP. DEM will exhibit a range of rolling micro cassettes for the drawing of low-carbon wire, new speci c micro cassettes for the production of ux-core wire, rolling cassettes for the production of indented wire and a range of products for the production of shaped wires. GCR Eurodraw SpA – Italy Fax : +39 02 9354 0452 Email : gcr@gcrgroup.com Website : www.gcrgroup.com

GCR Eurodraw SpA/ ComapacWire Machinery Stand: 11A66

➣➢➣ ➣➢➣

GCR Eurodraw will be exhibiting a number of innovations o ered by companies from within the group (GCR Eurodraw, Comapac Wire Machinery, DEM and SAMP brands).

GCR Eurodraw’s TCD wet drawing lines

▲

GCR Eurodraw will be exhibiting three new models: A modular dry drawing machine, • for ne-to-medium wires, equipped with a special transmission without reduction gears. This o ers the advantage of fewer components and, therefore, of reduced main- tenance. The blocks cooling system has been further developed using uid mechanics, reducing the water consumption and increasing heat transfer A modular machine for descaling • high carbon wire of medium-to-large diameter through a rotary double abrasive belt. It can be supplied in single or double grinding belt con guration. It forms the wire rod preparation line for dry drawing machines for the production of

The 3000A annealer from GER

▲

Another new annealer model, 220A, is also available for ne copper wire drawing machines. It is also a standalone model with a 15KVA transformer, 120mm diameter contact pulley, wire diameter range of 0.15mm to 0.5mm, and a maximum speed of 30m per second. This model is o ered with either its own drive motor or driven from the drawing machine by a at belt. GER SA – Belgium Website : www.ger.be

GER SA Stand: 9F60

GER SA has manufactured a newly designed continuous resistance annealer

H Folke Sandelin AB (HFSAB) Stand: 9E40

H Folke Sandelin introduces its latest modular design cable repair and recovery system, CRRS1. The Cable Repair and Recovery System, CRRS1, has been speci cally designed to assist cable manufacturers when a problem occurs during the normal cable manufacturing process. The cable repair and recovery system will:

➣➢➣

128

EuroWire – March 2010