2018 Mustang Owner's Manual

Parking Aids

The fixed and active guidelines fade in and out depending on the steering wheel position. The active guidelines do not show when the steering wheel position is straight. Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the side view mirrors and rear view mirror to get better coverage on both sides and rear WARNING When manual zoom is on, the full area behind your vehicle may not show. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in reverse (R). When manual zoom is enabled, only the centerline is shown. Selectable settings for this feature are Zoom in (+) and Zoom out (-). Press the symbol in the camera screen to change the view. The default setting is Zoom OFF. This feature allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in reverse (R). When the transmission shifts out of reverse (R), the feature automatically turns off and must be reset when it is used again. Camera SystemSettings The rear view camera system settings can be accessed through the display screen. See General Information (page 88). of your vehicle. Manual Zoom

A

B C D

E

F

E142436

A B C D E

Active guidelines

Centerline

Fixed guideline: Green zone Fixed guideline: Yellow zone Fixed guideline: Red zone

Rear bumper F Active guidelines only show with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If the steering wheel position changes while reversing, your vehiclemight deviate fromthe original intended path.

161

Mustang(CZG)Canada/UnitedStatesofAmerica,VehiclesBuiltFrom:07-08-2017, JR3J 19A321AAenUSA,Editiondate:201707,FirstPrinting