2018 Mustang Owner's Manual

Cruise Control

Detection Issues

Press RES . Your vehicle speed returns to the previously set speed and gap setting. The set speed displays continuously in the information display when the system is active. Automatic Cancellation Note: If the engine speed drops too low, an audible warning sounds and a message appears in the information display. Automatic braking releases. The system does not operate below 12 mph (20 km/h). Hilly Condition Usage Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again after the brakes cool. Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent it from overheating. SwitchingAdaptiveCruiseControl Off Note: You erase the set speed and gap setting when you switch the system off. Press OFF when the system is in standby mode, or switch the ignition off.

WARNINGS On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers. In these cases, the systemmay brake late or unexpectedly. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. If the systemmalfunctions, have your vehicle checked as soon as possible. The radar sensor has a limited field of view. It may not detect vehicles at all or detect a vehicle later than expected in some situations. The lead vehicle graphic does not illuminate if the system does not detect a vehicle in front of you.

167

Mustang(CZG)Canada/UnitedStatesofAmerica,VehiclesBuiltFrom:07-08-2017, JR3J 19A321AAenUSA,Editiondate:201707,FirstPrinting