2018 Mustang Owner's Manual

Driving Aids

Speed

Sensitivity

Graphics

Distance Gap

Time Gap

62 mph (100 km/h) 62 mph (100 km/h) 62 mph (100 km/h)

Normal

Grey

>82 ft (25 m)

>0.9sec

between 0.6sec and 0.9sec

56–82 ft (17–25 m)

Normal

Yellow

Normal

Red

<56 ft (17 m)

<0.6sec

Blocked Sensors

Adjusting Pre-Collision Assist Settings You can adjust the Alert andDistance Alert sensitivity to one of three possible settings by using the information display control. See General Information (page 88). You can switch the distance alert and indication function off using the informationdisplay controls. See General Information (page 88). If required, you can switch active braking off using the information display controls. See General Information (page 88). Note: Active braking automatically turns on every time you switch your vehicle on.

E252419

If a message regarding a blocked sensor or camera appears in the information display, the radar signals or camera images are obstructed. The radar sensor is located behind a fascia cover near the driver side of the lower grille. With an obstructed radar, the system does not function and cannot detect a vehicle ahead. With the front camera obstructed, the system does not respond to pedestrians or stationary vehicles and the system performance on moving vehicles reduces. The following table lists possible causes and actions for when this message displays.

182

Mustang(CZG)Canada/UnitedStatesofAmerica,VehiclesBuiltFrom:07-08-2017, JR3J 19A321AAenUSA,Editiondate:201707,FirstPrinting