2018 Mustang Owner's Manual

Seatbelts

If...

Then...

You and the front seat passenger buckle your seatbelts before you switch the igni- tion on or less than 1-2minutes elapse after you switch the ignition on... You or the front seat passenger do not buckle your seatbelts before your vehicle reaches at least 6 mph (9.7 km/h) and 1-2 minutes elapse after you switch the ignition on... The seatbelt for the driver or front passenger is unbuckled for about 1 minute while the vehicle is traveling at least 6mph (9.7 km/h) and more than 1-2 minutes elapse after you switch the ignition on... Deactivating and Activating the Belt-Minder Feature WARNING While the system allows you to safely belted and surviving an accident. We recommend you leave the system activated for yourself and others whomay use the vehicle. Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process. Note: If you are using MyKey, you cannot disable the Belt-Minder. Also, if you have previously disabled the Belt-Minder, it will be re-enabled during the use of MyKey. deactivate it, this system is designed to improve your chances of being

The Belt-Minder feature will not activate.

The Belt-Minder feature activates, the seatbelt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your seatbelts. The Belt-Minder feature activates, the seatbelt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your seatbelts. Before following the procedure, make sure that: • You set the parking brake. • You put the transmission in park (P) (automatic transmission) or neutral (N) (manual transmission). • You switch the ignition off. • You unbuckle the driver and front passenger seatbelts. 1. Switch the ignition on. Do not start the vehicle. 2. Wait until the seatbelt warning light turns off (about one minute). After Step 2, wait an additional 5 seconds before proceeding with Step 3. Once you start Step 3, you must complete the procedure within 30 seconds. 3. For the seating position you are switching off, buckle then unbuckle the seatbelt three times at a moderate speed, ending in the unbuckled state. After Step 3, the seatbelt warning light turns on.

Read Steps 1 - 4 thoroughly before proceeding with the programming procedure.

34

Mustang(CZG)Canada/UnitedStatesofAmerica,VehiclesBuiltFrom:07-08-2017, JR3J 19A321AAenUSA,Editiondate:201707,FirstPrinting