2018 Mustang Owner's Manual

Lighting

You can switch the fog lamps on when the lighting control is in any position except Off and the high beams are not on. DIRECTION INDICATORS

E142451 Switch the lighting control to the autolamps position. See Autolamps (page 72). Overriding the System When you switch on the high beams, pushing or pulling the stalk provides a temporary override to low beam. Automatic High Beam Indicator (If Equipped) The indicator lamp illuminates to confirm when the system is ready to assist. FRONT FOG LAMPS (If Equipped)

E162681 Push the lever up or down to use the direction indicators. Note: Tap the lever up or down tomake the direction indicators flash three times to indicate a lane change. WELCOME LIGHTING (If Equipped) Pony Projection Lights The pony projection lights are on the bottom of the exterior mirror housings. They project an image onto the ground a short distance from your vehicle when welcome lighting or lighted entry turns on. Note: Moisture, frost and ice build-up or other types of contamination on the surface of the light lens can cause non-permanent distortion or reduced brightness of the image. Do not use abrasive materials to clean the lens. Note: For vehicles with manual transmission, you may need to engage the parking brake for this feature to operate.

E142453 Press the control to switch the fog lamps on or off.

75

Mustang(CZG)Canada/UnitedStatesofAmerica,VehiclesBuiltFrom:07-08-2017, JR3J 19A321AAenUSA,Editiondate:201707,FirstPrinting