Morrisville Unified Development Ordinance - April 2019

Article 7: Stormwater Management Section 7.4. Maintenance 7.3.6. Evaluation of Standards for Stormwater Control Measures

Evaluation of Standards for Stormwater Control Measures

7.3.6.

A. Evaluation According to Contents of Design Manual All stormwater control measures, stormwater systems and stormwater treatment practices (also referred to as Best Management Practices, or BMPs) required under this article shall be evaluated by the Stormwater Administrator according to the policies, criteria, and information, including technical specifications and standards and the specific design criteria for each stormwater practice, in the Design Manual. The Stormwater Administrator shall determine whether proposed BMPs will be adequate to meet the requirements of this article. Stormwater treatment practices that are designed, constructed, and maintained in accordance with the criteria and specifications in the Design Manual and the approved accounting tool will be presumed to meet the minimum water quality and quantity performance standards of this article. Whenever an applicant proposes to utilize a practice or practices not designed and constructed in accordance with the criteria and specifications in the Design Manual, the applicant shall have the burden of demonstrating that the practice(s) will satisfy the minimum water quality and quantity performance standards of this article. The Stormwater Administrator may require the applicant to provide the documentation, calculations, and examples necessary for the Stormwater Administrator to determine whether such an affirmative showing is made. B. Determination of Adequacy; Presumptions and Alternatives

Dedication of BMPs, Facilities, and Improvements

7.3.7.

The Town may accept dedication of any existing or future stormwater management facility for maintenance, provided such facility meets all the requirements of this article and includes adequate and perpetual access and sufficient area, by easement or otherwise, for inspection and regular maintenance.

SECTION 7.4. MAINTENANCE

General Standards for Maintenance

7.4.1.

A. Function of BMPs as Intended The owner of each engineered stormwater control installed pursuant to this article shall maintain and operate it so as to preserve and continue its function in controlling stormwater quality and quantity at the degree or amount of function for which the engineered stormwater control was designed. B. Annual Maintenance Inspection and Report The person responsible for maintenance of any engineered stormwater control installed pursuant to this article shall submit to the Stormwater Administrator an inspection report from one of the following persons performing services only in their area of competence: a qualified licensed North Carolina Professional Engineer or registered surveyor, landscape architect, or person certified by the North Carolina Cooperative Extension Service for stormwater treatment practice inspection and maintenance. The inspection report shall contain all of the following:

a. The name and address of the land owner;

b. The recorded book and page number of the lot of each engineered stormwater control;

c. A statement that an inspection was made of all engineered stormwater controls;

d. The date the inspection was made;

e. A statement that all inspected engineered stormwater controls are performing properly and are in compliance with the terms and conditions of the approved maintenance agreement required by this article; and

Morrisville, NC

April 23, 2019

Unified Development Ordinance

Page 7-11