2018 Escape Owner's Manual

Maintenance

Headlamp:

2 4

A B C

E142471 1. Reposition the coolant reservoir tank by lifting and rotating inward to provide more hand clearance. (Right side only) 2. Remove service cap. 3. Disconnect the electrical connector. 4. Remove bulb from the headlamp assembly by turning it counterclockwise, then pull it straight out. Install the new bulbs in reverse order from the steps above. Be sure that the spring clip is not damaged or detached from the headlamp assembly during the replacement procedure. CorneringLamp(HIDHeadlamps) 1. Remove service cap. 2. Disconnect electrical connector. 3. Release spring clip and rotate away from the assembly. 4. Pull bulb straight out toward the rear of the vehicle. Replacing HID Headlamp Bulbs (If Equipped) The low beam headlamps on your vehicle use a high intensity discharge source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assemblymust be replaced by your authorized dealer.

E142469

A B C

Side marker

Low beam headlamp

High beam headlamp (Halogen)/Cornering lamp (HID)

High beam headlamp (Halogen):

2 4

E142470 1. Remove service cap.

2. Disconnect the electrical connector. 3. Remove bulb from the headlamp assembly by turning it counterclockwise, then pull it straight out. Low beam headlamp (Halogen):

258

Escape(TM2)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201706,FirstPrinting