EoW September 2008

rod & bar production

Automatic cutting and straightening Delisi Srl manufacturers and sells automatic straightening and cutting machines for smooth and ribbed wires of 1mm to 20mm diameter. The feeding speed can be regulated by hand wheel or electronically on the basic model and it is variable from 1 to 200m/min. The spinner feeding is variable, with three speeds. Bar lengths can be measured with encoder or with the target rods. To suit individual requirements, Delisi can supply the machine with mechanical cut or with hydraulic flying shear cut. With flying shear cut, the wire doesn’t stop during the cut operation; the output is higher and the quality of cut wire is improved.

All be equipped with an electronic programmer to control the bars to be cut and their lengths. The rod collection bed has three lines with tiltable arms. The collecting bench of the machine is modular; the rod collection bed is variable to the length required by the customer. machines can

Model HS6H automatic wire ▲ ▲ straightening and cutting from Delisi Srl

The machine can be equipped with an inverter, or with a powered motor for higher output. Delisi Srl – Italy Fax : +39 0882 333236 Email : delisi@delisisrl.com Website : www.delisisrl.com Processing deformed wire rod Within the range of equipment designed and produced by the companies of the Eurolls Group (Eurolls, Teurema, Team Meccanica, Vitari, Cortinovis and Sictra) there are two product lines for processing deformed wire rod: the LR straightening and cutting lines and the LS stretching lines. The LR lines, that utilise spindler or roll straightening systems depending on product requirement, can produce bars of up to 14m in length and 16mm in diameter, at a speed of 6m/sec. Pay-off is either traditionally vertically, for coils of up to 3 ton in weight, or horizontally with a multi-coil system with in-line butt welding and automatic advancement. The line can also be equipped with an automatic tying system to prepare bundles of bars of a set number of pieces with absolute precision. The LS lines, that have the same pay-off options of the LR lines, mechanically improve the strength and properties of the wire rod as required by the new European code on high ductility materials for the construction industry, in the full diameter range of 5.5 to 16mm. Product take up is adaptable to specific requirements: horizontal or vertical spoolers, manual, semi or full automatic operation, using fixed and/or collapsible spools to make strapped coils, even with the possibility to position a LR straightening system in conjunction with the LS to produce high ductility rebars.

Eurolls SpA – Italy Fax : +39 0432 796501 821 Email : info@eurolls.com Website : www.eurolls.com

63

EuroWire – September 2008