Fluid Power Services 2026-2027

Hydraulic Hose Protection

Fire Sleeve Red Oxide Silicone Coated Glass Fibre Sleeving

Features • High flexibility • Continuous protection at an operating temperature of 260ºC • Ability to withstand a molten metal splash at 1200ºC • Highly resistant to most oils, hydraulic fluids, fuels, acids and alkalis • When exposed to flame the high grade rubber will form a protective SiO2 layer • Health and safety – provides personnel with protection against burns from hot hoses, steam lines etc. • Helps to reduce energy loss by retaining heat within pipework

Red Oxide Silicone Coated Fire Sleeve 15 m Part Number ID SL-FS10 10 mm SL-FS12 12 mm SL-FS16 16 mm SL-FS19 19 mm SL-FS25 25 mm SL-FS28 28 mm SL-FS32 32 mm SL-FS35 35 mm SL-FS38 38 mm SL-FS41 41 mm

8075

• Excellent flame resistance • Good abrasion resistance

Specifications Wall thickness

Approx. 3 mm

Four

Average dielectric strength 30 Kv + Materials

Manufactured from ‘E’ glass fibre yarn knitted to form a sleeve and coated with high grade silicone elastomer rubber

Operating temperature Up to 260°C

Can withstand molten metal splash at 1200°C

Size range up to 203 mm internal diameter Available in red oxide, blue, black, silver and custom colours by special order Hook and loop close also available

U.S. Department of Labor Mine Safety & Health Administration MSHA

Stainless Steel Overbraid Sleeving

Features • Stainless steel wire braided sleeving provides sensitive cables with an EMC screen to shield them against electromagnetic, electrostatic and radio frequency interference Applications • Screening of cables from electromagnetic, electrostatic and RF interference • Mechanical support • Protection against abrasion and corrosion • EMC and RFI applications Specifications Temperature range -35°C to +120°C Break resistance 784 N/mm² Break strength 47%

304 Grade Stainless Steel Overbraid Sleeving 10 m Part Number ID OD SL-SSB16 16 mm 16.44 mm SL-SSB20 20 mm 20.60 mm SL-SSB25 25 mm 25.60 mm SL-SSB32 32 mm 32.60 mm SL-SSB40 40 mm 40.60 mm SL-SSB51 51 mm 51.60 mm SL-SSB63 63 mm 63.60 mm SL-SSB76 76 mm 76.60 mm

8075

Flexguard Hose Burst

Features • High abrasion strength • Non-toxic • Heat resistance woven ballistic nylon

• Stays intact at the highest operating temperature possible for any nylon 6 – polycaprolactum abrasion fire sleeve treated with our proprietary heat and flame resistant coating technology • Easily installed over hoses, cables, tubing or pipes • Excellent resistance to UV, atmospheric agents, moisture and ageing Specifications Continuous operating temperature 126°C (260°F) Max. short term exposure 245°C (473°F) Wall thickness 1.14 mm

Flexguard Hose Burst 50 m Part Number

8075

ID

SL-FHB19 SL-FHB22 SL-FHB25 SL-FHB30 SL-FHB32 SL-FHB38 SL-FHB50 SL-FHB60 SL-FHB76

19 mm 22 mm 25 mm 30 mm 32 mm 38 mm 50 mm 60 mm 76 mm

U.S. Department of Labor Mine Safety & Health Administration MSHA

Hook and loop close also available

4.09