ALB1660 - PTFE Dry Lubricant

PTFE-Lube Spray, 10 oz.

Page 2 of 4

SECTION 3 — PHYSICAL DATA

BOILING POINT FOR PRODUCT : N/D VAPOR PRESSURE FOR PRODUCT : 70 psi @75 F VAPOR DENSITY FOR PRODUCT : N/D

SPECIFIC GRAVITY : 0.7314

V.O.C. (GRAMS PER LITER) : Not Applicable WATER SOLUBILITY : Negligible

APPEARANCE:

SECTION 4 — FIRE AND EXPLOSION DATA

FLASH POINT (COC): Level 3 Aerosol EXPLOSIVE LIMIT (PRODUCT) : Lower - N/A Upper - N/A SEC04.24

GENERAL HAZARD: Flammable liquid, can release vapors that form flammable mixtures at temperatures at or above the flashpoint. Static Discharge, material can accumulate static charge which can cause an incendiary electrical discharge. “Empty” containers retain product residue (liquid and/or vapour) and can be dangerous. DO NOT pressurize, cut, weld, braze, solder, drill or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode and cause injury or death. Empty containers should be completely drained, properly bunged and promptly returned to drum reconditioner, or properly disposed of. FIRE FIGHTING: Use water spray to cool fire exposed surfaces and to protect personnel. Isolate “fuel” supply from fire. Use foam, dry chemical, or water spray to extinguish fire. Avoid spraying water directly into storage containers due to danger of boil over. This liquid is volatile and gives off invisible vapors. Either the liquid or vapour may settle in low areas or travel some distance along the ground or surface to ignition sources where they may ignite or explode. HAZARDOUS COMBUSTION PRODUCTS: Fumes, smoke and carbon monoxide. SEC05.24 GENERAL: This material is an aspiration hazard and defats the skin. Breathing vapors of high concentrations may cause CNS depression. EYE CONTACT: May cause eye injury which may persist for several days. Liquid and vapour in high concentrations, causes irritations, tearing and burning sensation. SKIN CONTACT: Low order of toxicity. Frequent or prolonged contact may irritate and cause dermatitis. Skin contact may aggravate an existing dermatitis condition. INHALATION: High vapor concentrations (greater than approximately 100 ppm) are irritating to the eyes and the respiratory tract, may cause headaches, dizziness, anesthesia, drowsiness, unconsciousness, and other central nervous system effects, including death. INGESTION: May be poisonous or fatal if swallowed. A small amount of this product can cause mental sluggishness, nausea and vomiting leading to severe illness, and may produce adverse effects on vision with possible blindness or death if treatment not received. FIRST AID EYE CONTACT: Flush eyes with large amounts of water until irritation subsides. If irritation persists, get medical attention. SKIN CONTACT: Flush with large amounts of water; use soap if available. Remove grossly contaminated clothing, including, shoes, and launder before reuse. INHALATION: Using proper respiratory protection, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention. INGESTION: If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical attention. SECTION 5 — HEALTH HAZARD DATA

From the library of: Superior Sewing Machine & Supply LLC

Made with FlippingBook - Online catalogs