Drexel 2023 Stair Parts Brochure r3

Adhesive

6100E-10AD Non-Sag Adhesive This non-sag adhesive is a flexible and highly versatile rubber-based compound that exhibits exceptional adhesive contact and sealant qualities. It is perfect for vertical or overhead use such as drilled holes on the underside of handrail for iron baluster installation. The tack time is approximately 4 minutes with a full cure time of 24-72 hours, depending upon amount used, temperature and humidity. Use with a standard caulk gun cartridge. Fills approximately 110 holes depending on hole size. 10.2 oz clear adhesive. Dries clear.

LI-3707 EPOXY KIT WITH NOZZLE

LI-3706 EPOXY JOB LOT ADHESIVE NOZZLE Extra Nozzle for LI- 3707

Job-Lot Kit includes 9.5 oz. Adhesive Cartridge and nozzle for use in standard caulking guns. (Open work time is 5 minutes. Fills approximately 70 holes depending on hole size.)

LJ SMITH SKU # 6100E-10AD

LJ SMITH SKU # LI-3707 LI-3706

Installation Tools

LJ SMITH SKU # Tool LJ-3033

Dowel Runner

LJ-3044

Versa Tool

LJ-3044 Versa Tool Our VersaTool locates holes as well as starts and tightens hex nuts onto rail bolts. Drives 5/16" rail bolts and tightens 1/2" hex nuts. Also used to locate 1/4" pilot hole on handrails & rail drops for attaching to Conect-A-Kit® handrail fittings

LJ-3033 Dowel Runner For driving dowel screws into baluster bases. Use with drill driver

NOTES:

24

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood