Caterpillar Performance Handbook, January 2017, SEBD0351-47

First page Table of contents Previous page 1074 Next page Last page

Dimensions ● 299D2 XHP/299D2 (SteelTrack)/ 299D2 XHP (SteelTrack)

Compact Track Loaders

299D2 (Steel Track)

299D2 XHP (Steel Track)

MODEL

299D2 XHP

Operating weight

5265 kg 1500 kg 2143 kg 4286 kg 3298 kg 36.7 kPa 1767 mm 2270 mm 3189 mm 3931 mm 2125 mm 4032 mm 3208 mm 180 mm 852 mm 2399 mm 245 mm 1931 mm 1881 mm 1476 mm 2314 mm 1319 mm

5468 kg 1579 kg 2255 kg 4511 kg 3298 kg 38.1 kPa 1767 mm 2270 mm 3189 mm 3931 mm 2125 mm 4032 mm 3208 mm 180 mm 852 mm 2399 mm 245 mm 1931 mm 1881 mm 1476 mm 2314 mm 1319 mm

5571 kg 1608 kg 2298 kg 4595 kg 3298 kg 38.8 kPa 1767 mm 2270 mm 3189 mm 3931 mm 2125 mm 4032 mm 3208 mm 180 mm 852 mm 2399 mm 245 mm 1931 mm 1881 mm 1476 mm 2314 mm 1319 mm

11,608 lb

12,055 lb

12,281 lb 3546 lb 5065 lb 10,131 lb

Rated operating capacity at 35% Rated operating capacity at 50%

3308 lb 4725 lb 9450 lb 7270 lb 5.3 psi

3481 lb 4972 lb 9945 lb 7270 lb 5.5 psi

Tipping load

Breakout force, tilt cylinder

7270 lb 5.6 psi

Ground pressure

A Length of track on ground B Overall length of track C Length without bucket D Length with bucket on ground

69.6" 89.4"

125.5" 154.7"

E Height to top of cab

83.6"

F Maximum overall height

158.7" 126.3"

G Bucket pin height at maximum lift H Bucket pin height at carry position J Reach at maximum lift and dump K Clearance at maximum lift and dump

7.1"

33.6" 94.5"

L Ground clearance M Departure angle

9.6"

33° 54°

N Maximum dump angle

O Vehicle width

76.0" 74.0" 58.1" 91.1" 51.9"

P Turning radius from center — machine rear Q Turning radius from center — coupler R Turning radius from center — bucket S Maximum reach with arms parallel to ground

T Rack back angle at maximum height U Bucket pin reach at maximum lift

81°

493 mm 19.4" NOTE: Based on 75 kg (165 lb) operator, all fluids, two speed, 1981 mm (78") dirt bucket, 400 mm (15.7") tracks, and manual quick coupler (unless otherwise noted). 299D2 based on dual flange front idler/single flange rear idler, C2 enclosed cab with heat, glass door, standard flow hydraulics, mechanical suspension seat, and no optional counterweights. 299D2 XHP based on triple flange front/rear idlers, ride control, C3 enclosed cab A/C and glass door, side windows, and air ride seat. 19.4" 493 mm 19.4" 493 mm

Edition 47 15-101

Made with FlippingBook