Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 953D General Purpose Buckets

Track Loaders

General Purpose Bolt-on Adapters, LongTeeth & Segments

General Purpose FlushWeld-on

General Purpose Bolt-on Cutting Edge

General Purpose Bare

Adapters & LongTeeth

BUCKET

Capacity, Rated (Nominal Heaped)

1.75 m 3 1.45 m 3

1.85 m 3 1.55 m 3

1.85 m 3 1.55 m 3

1.85 m 3 1.45 m 3

2.29 yd 3 1.90 yd 3

2.42 yd 3 2.03 yd 3

2.42 yd 3 2.03 yd 3

2.42 yd 3 1.90 yd 3

Capacity, Struck Cutting Edge,Type

Straight

Straight

Straight

—

Bucket Width ◀

2392 mm

2485 mm

2395 mm

2438 mm

94.2"

97.8"

94.3"

96"

Teeth

None

8, bolt-on plus replaceable tips

None

8, bolt-on plus replaceable tips

Dump Clearance @ Full Lift and 45° Discharge Reach at 45° Discharge Angle 2133 mm (7'0") Clearance

2855 mm

2616 mm

2786 mm

2659 mm

112.4"

102.9"

109.6"

104.7"

1550 mm

1630 mm

1559 mm

1656 mm

61"

64.2"

61.4"

65.2"

Reach @ Full Lift and 45° Discharge

928 mm 92 mm

1099 mm 140 mm

961 mm 117 mm

1104 mm 105 mm

36.5"

43.3"

37.8"

43.5"

Digging Depth

3.6"

5.5"

4.6"

4.1"

Ground Clearance from Face of Shoes

416 mm

416 mm

416 mm

416 mm

16.3"

16.3"

16.3"

16.3"

Overall MachineWidth without Bucket (with Standard Track) 480 mm (19") Overall MachineWidth without Bucket (with NarrowTrack) 380 mm (15")

2280 mm

2280 mm

2280 mm

2280 mm

89.7"

89.7"

89.7"

89.7"

2180 mm 5926 mm 3105 mm 11 431 kg 160.5 kN 15 517 kg

2180 mm 6252 mm 3105 mm 11 089 kg 157.8 kN 15 758 kg

2180 mm 6017 mm 3105 mm 11 252 kg 159.3 kN 15 638 kg

2180 mm 6198 mm 3105 mm 11 255 kg 162.5 kN 15 635 kg

85.8"

85.8"

85.8"

85.8" 244"

Overall Length Overall Height

233.3" 122.2"

246.1" 122.2"

236.9" 122.2"

122.2"

StaticTipping Load Breakout Force* OperatingWeight**

25,201 Ib 36,092 Ib 34,209 lb

24,447 Ib 35,491 Ib 34,740 lb

24,806 Ib 35,828 Ib 34,475 Ib

24,813 Ib 36,549 Ib 34,469 Ib

* Breakout force is measured 100 mm (3.94") behind tip of cutting edge with bucket hinge pin as pivot point. **Operating weight includes coolant, lubricants, full fuel tank, ROPS cab, bucket, and 75 kg (165 lb) operator. ◀ Bolt-on teeth increase bucket width by 52 mm (2") . Bolt-on cutting edge increases bucket width by 17 mm (0.67") .

Machine stability can be affected by the addition of other attachments. Add or subtract the following to/from machine operating weight and static tipping load:

Change in StaticTipping Load for General Purpose Bucket

Change in OperatingWeight

kg

lb

kg

lb

Ripper (includes ripper, rear lines, and third valves). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wide track shoes, 480 mm (19") double grouser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear bumper (removal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

+461

+967

+1016

+2131

Standard

Standard

–588 –185

–405 –411

–1296 – 408

– 892 – 906

18-10 Edition 47