Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 953K General Purpose Buckets

Track Loaders

General Purpose FlushWeld-on Adapters & LongTeeth

Performance Series Bolt-on Adapters, Long Teeth & Segments

BUCKET

Capacity, Rated (Nominal Heaped)

1.85 m 3 1.45 m 3

2.1 m 3 1.8 m 3

2.42 yd 3 1.90 yd 3

2.75 yd 3 2.35 yd 3

Capacity, Struck Cutting Edge,Type

Straight

Bucket Width ◀

2438 mm

2536 mm

96"

99.8"

Teeth

8, bolt-on plus replaceable tips 8, bolt-on plus replaceable tips

Dump Clearance @ Full Lift and 45° Discharge

2659 mm 1656 mm 1104 mm 105 mm 416 mm

2552 mm 1694 mm 1163 mm 140 mm 416 mm

104.7"

100.5"

Reach at 45° Discharge Angle 2133 mm (7'0") Clearance

65.2" 43.5"

66.7" 45.8"

Reach @ Full Lift and 45° Discharge

Digging Depth

4.1"

5.5"

Ground Clearance from Face of Shoes

16.3"

16.3"

Overall MachineWidth without Bucket (with Standard Track) 480 mm (19") Overall MachineWidth without Bucket (with NarrowTrack) 380 mm (15")

2280 mm

2316 mm

89.7"

91.2"

2180 mm 6394 mm 3155 mm 11 255 kg 162.5 kN 15 787 kg

2216 mm 6476 mm 3155 mm 10 786 kg 143.5 kN 16 193 kg

85.8"

87.2"

Overall Length Overall Height

251.7" 124.2"

255.2" 124.2"

StaticTipping Load Breakout Force* OperatingWeight**

24,813 Ib 36,549 Ib 34,804 lb

23,779 lb 32,260 lb 35,698 lb

* Breakout force is measured 100 mm (3.94") behind tip of cutting edge with bucket hinge pin as pivot point. **Operating weight includes coolant, lubricants, full fuel tank, ROPS cab, bucket, and 75 kg (165 lb) operator. ◀ Bolt-on teeth increase bucket width by 52 mm (2") . Bolt-on cutting edge increases bucket width by 17 mm (0.67") .

Machine stability can be affected by the addition of other attachments. Add or subtract the following to/from machine operating weight and static tipping load:

Change in StaticTipping Load for General Purpose Bucket

Change in OperatingWeight

kg

lb

kg

lb

Ripper (includes ripper, rear lines, and third valves). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wide track shoes, 480 mm (19") double grouser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear bumper (removal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

+704

+1476

+1552

+3254

Standard

Standard

–588 –167

– 405 – 371

–1296 – 368

– 892 – 818

18

Edition 47 18-17

Made with