Caterpillar Performance Handbook, January 2017, SEBD0351-47

Specifications ● D9R/D9T

Rippers

TRACTOR/RIPPER

D9R/D9T

Adjustable Parallelogram

RipperType

Single Shank

Multi-shank

Dimensions: Ripper toTrack

Ripper length behind track, shank vertical, ripper up

A With Pushblock B Without Pushblock

N/A

N/A

1.57 m

1.33 m

5'2"

4'4"

Ripper length behind track, shank vertical, ripper down C With Pushblock

N/A

N/A

D Without Pushblock

1.88 m

1.71 m

6'2"

5'7"

Tip to track distance, shank vertical E Ripper Up

689 mm 944 mm

510 mm 890 mm

2'3.2" 3'1.2"

1'8.1" 2'11"

F Ripper Down

Ripper Shank* G Maximum digging depth H Dig adjustment per hole I Total dig adjustment

1231 mm 295 mm 590 mm

798 mm 250 mm 250 mm

4'0.6"

2'7.6"

12"

10" 10"

1'11.2"

Pitch Adjustment, ripper down: J Forward

10.6° 15.2°

10°

K Backward

15.1°

L Maximum reach at ground line

1.25 m

1.16 m

4'1"

3'10"

M Maximum ground clearance under tooth (shank pinned in bottom hole)

882 mm

879 mm

2'10.9"

2'10.6"

N Maximum ramp angle, ripper up (shank pinned in bottom hole)

36.9°

37.5°

Shank Section Ripper Beam O Overall width

90 × 355 mm

75 × 332 mm

3.5" × 14"

2.9" × 13.1"

2.64 m

N/A N/A N/A

8'8" 15" 18"

P Height Q Length

380 mm 457 mm

Clearance under beam, shank vertical R Ripper Up

1.77 m

N/A N/A

5'10" 15.5"

S Ripper Down

393 mm

Number of Pockets

1

3

T Pocket Spacing U Shank Gauge

1176 mm

N/A N/A

3'10.3"

2.35 m 71 mm 1.50 m

7'8" 2.8"

V Track Clearance with standard shoe W Width across widest part of lift cylinders

71 mm 1.50 m

2.8"

4'11"

4'11"

InstalledWeights: Ripper with standard shank Each additional tooth group Ripper Forces:** Penetration Force, shank vertical

4293 kg

4153 kg 347 kg

9464 lb

9156 lb

N/A

765 lb

158 kN 332 kN

154 kN 361 kN

35,520 lb 74,637 lb

34,621 lb

Pryout Force, shank vertical 81,156 lb * *Deep Ripping Shank is available for D9R/D9T single shank rippers. Hydraulic pin puller is standard with deep ripping shank. Deep RippingArrangement maximum digging depth is 1.66 m (5'5") for D9R/D9T. **Forces are for a ripper on a tractor equipped with EROPS, U-Dozer and performance track. Forces will vary slightly with other vehicle configurations. NOTE: Letters correspond to ripper dimension drawings.

19-70 Edition 47