Caterpillar Performance Handbook, January 2017, SEBD0351-47

Performance Data ● 962K

Wheel Loaders IntegratedToolcarriers

BucketType

General Purpose — Pin On

Material Handling — Pin On

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Bolt-on Cutting Edges

Teeth & Segments Teeth

Teeth & Segments Teeth

Teeth & Segments Teeth

EdgeType

Capacity — rated (§)

3.80 4.97 3.36 4.39

3.80 4.97 3.36 4.39

3.60 4.71 3.12 4.08

2.70 3.53 2.32 3.03

2.70 3.53 2.32 3.03

2.50 3.27 2.11 2.76

2.90 3.79 2.52 3.30

2.90 3.79 2.52 3.30

2.70 3.53 2.31 3.02

m 3 yd 3 m 3 yd 3

Capacity — struck (§)

Width (§)

mm 2927 2994 2994 2927 2994 2994 2927 2994 2994 ft/in 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" 9'7" 9'9" 9'9" mm 2975 2855 2855 3112 2987 2987 3070 2944 2944 ft/in 9'9" 9'4" 9'4" 10'2" 9'9" 9'9" 10'0" 9'7" 9'7" mm 1457 1566 1566 1206 1308 1308 1248 1350 1350 ft/in 4'9" 5'1" 5'1" 3'11" 4'3" 4'3" 4'1" 4'5" 4'5" mm 2940 3101 3101 2679 2840 2840 2739 2900 2900 ft/in 9'7" 10'2" 10'2" 8'9" 9'3" 9'3" 8'11" 9'6" 9'6" mm 8587 8759 8759 8326 8498 8498 8386 8558 8558 ft/in 28'3" 28'9" 28'9" 27'4" 27'11" 27'11" 27'7" 28'1" 28'1" mm 5894 5894 5894 5835 5835 5835 5192 5192 5192 ft/in 19'5" 19'5" 19'5" 19'2" 19'2" 19'2" 17'1" 17'1" 17'1" mm 13 952 14 124 14 124 13 796 13 965 13 965 13 831 14 001 14 001 ft/in 45'10" 46'5" 46'5" 45'4" 45'10" 45'10" 45'5" 46'0" 46'0" kg 13 400 13 258 13 538 13 829 13 693 14 027 13 706 13 569 13 862 lb 29,534 29,220 29,838 30,480 30,180 30,917 30,209 29,906 30,553 kg 14 155 14 011 14 298 14 556 14 418 14 763 14 435 14 296 14 596 lb 31,198 30,881 31,514 32,081 31,778 32,538 31,815 31,510 32,171 kg 11 481 11 339 11 600 11 899 11 763 12 078 11 783 11 646 11 921 lb 25,304 24,991 25,568 26,226 25,926 26,622 25,971 25,668 26,275 kg 12 257 12 113 12 381 12 647 12 510 12 835 12 534 12 395 12 676 lb 27,015 26,698 27,289 27,874 27,572 28,289 27,624 27,319 27,939 198 lbf 34,784 34,548 37,504 43,166 42,930 47,301 40,945 40,709 44,671 kg 20 558 20 666 20 509 20 274 20 382 20 225 20 330 20 438 20 281 lb 45,308 45,546 45,200 44,684 44,922 44,576 44,807 45,045 44,699 kN 154 153 166 192 191 210 182 181 mm 88 88 58 88 88 58 88 88 58 in 3.5 3.5 2.3 3.5 3.5 2.3 3.5 3.5 2.3

23

Dump clearance at maximum lift and 45° discharge (§)

Reach at maximum lift and 45° discharge (§) Reach at level lift arm and bucket level (§)

Digging depth (§)

Overall length

Overall height with bucket at maximum lift Loader clearance circle with bucket at carry position (§)

Static tipping load, straight (ISO)* Static tipping load, Static tipping load, articulated (ISO)* Static tipping load, straight (rigid tire)*

articulated (rigid tire)*

Breakout force** (§)

Operating weight*

* *Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard, secondary steering, and sound suppression. **Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C. (§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C governing loader ratings. (ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing. (Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.

NOTE: Bucket availability varies by region. Consult your local dealer for availability.

Edition 47 23-181