Caterpillar Performance Handbook, January 2017, SEBD0351-47
Machine Dimensions ● 926M*, 930M*
Wheel Loaders IntegratedToolcarriers
Dimensions listed are for a machine configured with Fusion general purpose bucket, bolt-on cutting edge, standard counterweight (924K), heavy counterweight (930K), additional guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
926M* Standard
926M* High Lift
930M* Standard
MODEL
Bucket
1.9 m 3
1.9 m 3
2.1 m 3
2.5 yd 3
2.5 yd 3
2.8 yd 3
A Maximum overall length**
7451 mm 3000 mm 1500 mm 1986 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2885 mm 458 mm 1024 mm 3580 mm 3907 mm 5076 mm
8093 mm 3000 mm 1500 mm 1986 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 135 mm 3378 mm 649 mm 1261 mm 4073 mm 4400 mm 5569 mm
7530 mm 3000 mm 1500 mm 1993 mm 397 mm 2235 mm 3340 mm 3223 mm 685 mm 100 mm 2828 mm 458 mm 1064 mm 3580 mm 3907 mm 5147 mm
24'5" 9'10" 4'11"
26'7" 9'10" 4'11"
24'8" 9'10" 4'11"
B Wheel base
C Machine center point to front axle
D Rear axle to counterweight
6'6" 1'3" 7'4"
6'6" 1'3" 7'4"
6'6" 1'3" 7'4"
E Ground clearance***
F Height to top of engine compartment
G Height to top of ROPS*** H Height to top of stack
10'11"
10'11"
10'11"
10'7"
10'7"
10'7"
J Tire Radius (empty machine)***
2'3"
2'3"
2'3"
K Maximum digging depth (bucket level)*** L Maximum rollback at carry height M Dump clearance at full lift and 45° discharge angle** N Hinge pin height at carry position O Reach at full lift and 45° dump** P Clearance level bucket at full height*** Q Maximum hinge pin height*** R Maximum overall height*** S Full dump at maximum lift T Maximum roll back at maximum lift
4"
5"
4"
45°
49°
45°
9'5" 1'6" 3'4"
11'0"
9'3" 1'6" 3'5"
2'2" 4'1"
11'9"
13'4" 14'5" 18'3"
11'9"
12'10"
12'10" 16'10"
16'7"
50° 54°
49° 51°
49° 54°
Tires
20.5 R25 (L-3) XHA2
20.5 R25 (L-3) XHA2
20.5 R25 (L-3) XHA2
*Meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. **Varies with bucket. ***Varies with tire.
23-244 Edition 47
Made with FlippingBook