Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 950L, 950M

Wheel Loaders IntegratedToolcarriers

Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.

◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.

950L

950M

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

MODEL

4.1 yd 3

3.1 m 3

4.1 yd 3

3.1 m 3

A Height to top of exhaust pipe

3415 mm 2697 mm 3446 mm 663 mm 2856 mm 3995 mm 5325 mm 1675 mm 3350 mm 747 mm 8249 mm 1319 mm 89 mm

3427 mm 2697 mm 3446 mm 659 mm 2876 mm 4021 mm 5524 mm 1675 mm 3350 mm 746 mm 8199 mm 1429 mm 90 mm

11'2" 8'10" 11'4"

11'3" 8'10" 11'4"

B Height to top of engine compartment

C Height to top of ROPS

D Hinge pin height at carry position ◆ E Dump clearance at full lift and 45° discharge angle

2'2"

26"

9'4"

9'5"

F Hinge pin height at full lift ◆ G Maximum overall height ◆ H Maximum digging depth

13'1" 17'6"

13'2" 18'2"

3.5" 5'6"

3.5" 5'6"

J Machine center point to axle

K Wheel base L Radius of tire

11'0"

11'0"

2'5"

29"

◆ M Maximum overall length

27'1"

26'11"

◆ N Reach at full lift

4'3"

4'8"

O Maximum rollback at maximum lift P Maximum rollback at carry height Q Maximum rollback at ground

60° 49° 41°

59° 46° 45°

Ground clearance (std. tires) Tread width (std. tires) Width over tires (std. tires) Tires used for measurements

368 mm 2140 mm 2814 mm

385 mm 2140 mm 2790 mm

1'2" 7'0" 9'3"

1'3" 7'0" 9'2"

L3 Michelin XHA2

L3 Michelin XHA2

These machines are only available in certain regions. Contact your local Cat dealer for product availability.

23-248 Edition 47