Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 980L, 980M, 982M

Wheel Loaders IntegratedToolcarriers

23

Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.

◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.

980L/980M General Purpose Bolt-on Edges

982M

General Purpose Bolt-on Edges

MODEL

7.1 yd 3

6.1 m 3

8.0 yd 3

5.4 m 3

A Height to top of exhaust pipe

3746 mm 3110 mm 3813 mm 621 mm 3273 mm 4539 mm 6421 mm 103 mm 1900 mm 3800 mm 885 mm 9493 mm 1481 mm

3719 mm 3083 mm 3786 mm 790 mm 3365 mm 4743 mm 6592 mm 116 mm 1900 mm 3800 mm 857 mm 10 177 mm 1569 mm

12'4" 10'3" 12'7"

12'3" 10'2" 12'6"

B Height to top of engine compartment

C Height to top of ROPS

D Hinge pin height at carry position ◆ E Dump clearance at full lift and 45° discharge angle

2'1"

2'8"

10'9"

11'1" 15'7" 21'8"

F Hinge pin height at full lift ◆ G Maximum overall height ◆ H Maximum digging depth

14'11" 21'1"

5"

5"

J Machine center point to axle

6'3"

6'3"

K Wheel base L Radius of tire

12'6" 2'11" 31'2" 4'11"

12'6" 2'10" 33'5"

◆ M Maximum overall length

◆ N Reach at full lift

5'2"

O Maximum rollback at maximum lift P Maximum rollback at carry height Q Maximum rollback at ground

61° 48° 40°

57° 48° 42°

Ground clearance (std. tires) Tread width (std. tires) Width over tires (std. tires) Tires used for measurements

453 mm 2440 mm 3265 mm

426 mm 2540 mm 3452 mm

1'6" 8'0"

1'5" 8'4"

10'9"

11'4"

L4 Michelin XLDD1

L4 BridgestoneVLTS

These machines are only available in certain regions. Contact your local Cat dealer for product availability.

Edition 47 23-251