Caterpillar Performance Handbook, January 2017, SEBD0351-47

Machine Dimensions ● 950 GC, 950H, 962H

Wheel Loaders IntegratedToolcarriers

Dimensions shown represent standard machine with bucket, bolt-on cutting edge, and standard tires.

◆ Varies with Bucket Size and/or Bucket Configuration — Refer to Performance Data.

950 GC

950H

962H

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

General Purpose Bolt-on Edges

MODEL

4.3 yd 3

3.1 m 3

4 yd 3 10'8"

3.5 m 3

4.5 yd 3

3.3 m 3

A Height to top of exhaust pipe

3596 mm 2568 mm 3458 mm 655 mm 3012 mm 4188 mm 5693 mm 1650 mm 3300 mm 750 mm 8288 mm 1292 mm 86 mm

3278 mm 2448 mm 3461 mm 624 mm 2936 mm 3992 mm 5363 mm 1675 mm 3350 mm 746 mm 7961 mm 1263 mm 89 mm

3278 mm 2448 mm 3461 mm 664 mm 3046 mm 4182 mm 5515 mm 1675 mm 3350 mm 746 mm 8291 mm 1269 mm 90 mm

11'9"

10’8”

B Height to top of engine compartment

8'5"

8'0"

8’0”

C Height to top of ROPS

11'4"

11'4"

11’4”

D Hinge pin height at carry position ◆ E Dump clearance at full lift and 45° discharge angle

2'1"

2'0"

2’2”

9'10" 13'8" 18'8"

9'7"

9’11” 13’7” 18’2”

F Hinge pin height at full lift ◆ G Maximum overall height ◆ H Maximum digging depth

13'1" 17'8"

3"

3.5" 5'5"

3.5” 5’5”

J Machine center point to axle

5'4"

K Wheel base L Radius of tire

10'9"

11'0"

11’0”

2'5"

2'5"

2'5"

◆ M Maximum overall length

27'2"

26'2"

27'3"

◆ N Reach at full lift

4'2"

4'1"

4'1"

O Maximum rollback at maximum lift P Maximum rollback at carry height Q Maximum rollback at ground

60° 45° 40°

59.5° 49.4°

59.5° 48.5°

41°

40°

Ground clearance (std. tires) Tread width (std. tires) Width over tires (std. tires) Tires used for measurements

460 mm 2150 mm 2751 mm

397 mm 2140 mm 2784 mm

397 mm 2140 mm 2784 mm

1'6" 7'0" 9'0"

1'3" 7'0" 110"

1’3” 7’0” 110"

L3Triangle TB516

23.5R25 L3 Michelin XHA2

23.5R25 L3 Michelin XHA2

These machines are only available in certain regions. Contact your local Cat dealer for product availability.

23-254 Edition 47