Caterpillar Performance Handbook, January 2017, SEBD0351-47
Machine Dimensions ● with Fusion Pallet Forks
Wheel Loaders IntegratedToolcarriers
23
MODEL
950K
1 Fork tine length
1524 mm 762 mm
1829 mm 915 mm
2134 mm 1067 mm
2438 mm 1219 mm
60" 30"
72" 36"
84" 42"
96" 48"
2 Load center
Tipping load — forks level straight
9232 kg
8763 kg 7570 kg 3785 kg 4542 kg
8327 kg 7185 kg 3592 kg 4311 kg
7924 kg 6827 kg 3414 kg 4096 kg
20,347 lb 17,599 lb
19,313 lb 16,685 lb 8343 lb 10,011 lb
18,353 lb 15,835 lb
17,464 lb 15,047 lb
Tipping load — forks level articulated 7985 kg
Rated load (SAE J1197)†
3993 kg
8800 lb
7917 lb 9501 lb
7523 lb 9028 lb
Rated load (CEN EN 474-3 rough terrain)† 4791 kg
10,559 lb
Rated load (CEN EN 474-3 firm and level ground)†
6388 kg 8774 mm 1189 mm
6056 kg
5748 kg
5424 kg
14,079 lb
13,348 lb
12,668 lb
11,954 lb
3 Maximum overall length
9079 mm 1189 mm
9384 mm 1189 mm
9688 mm 1189 mm
345.4"
357.4" 46.8"
369.4"
381.4"
4 Reach with forks at ground level 5 Ground to top of tine at minimum height and fork level
46.8"
46.8"
46.8"
68 mm
68 mm
68 mm
68 mm
2.7"
2.7"
2.7"
2.7"
6 Reach with arms horizontal and forks level
1728 mm 1013 mm
1728 mm 1013 mm
1728 mm 1013 mm
1728 mm 1013 mm
68.0" 39.9"
68.0" 39.9"
68.0" 39.9"
68.0" 39.9"
7 Reach with fork at maximum height 8 Ground to top of tine with arms horizontal and fork level 9 Ground to top of tine at maximum height and fork level
1798 mm
1798 mm
1798 mm
1798 mm
70.8"
70.8"
70.8"
70.8"
3733 mm
3733 mm
3733 mm
3733 mm
147.0"
147.0"
147.0"
147.0"
10 Overall height of fork at full lift (top of carriage to ground)
4863 mm
4863 mm 2222 mm
4863 mm 2006 mm
4863 mm 1792 mm
191.5"
191.5"
191.5"
191.5"
11 Clearance at full lift and maximum dump 2438 mm
96.0"
87.5"
79.0"
70.5"
12 Maximum discharge angle from horizontal
45°
45°
45°
45°
13 Carriage width 14 Carriage height
2528 mm 1220 mm 2178 mm 576 mm 180 mm
2528 mm 1220 mm 2178 mm 576 mm 180 mm
2528 mm 1220 mm 2178 mm 576 mm 180 mm
2528 mm 1220 mm 2178 mm 576 mm 180 mm
99.5" 48.0" 85.7" 22.7"
99.5" 48.0" 85.7" 22.7"
99.5" 48.0" 85.7" 22.7"
99.5" 48.0" 85.7" 22.7"
15 Outside tine width (maximum spread) 16 Outside tine width (minimum spread)
Tine width (single tine)
7.1" 3.5"
7.1" 3.5"
7.1" 3.5"
7.1" 3.5"
Tine thickness
90 mm
90 mm
90 mm
90 mm
Operating weight
19 445 kg 42,857 lb 19 507 kg 42,994 lb 19 570 kg 43,133 lb 19 632 kg 43,269 lb
Based on 2438 mm (96") carriage, Fusion coupler and Fusion pallet fork. Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning, ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator. Static tip- ping loads conform to the international standard as defined in ISO* 14397-1 (Sept2007). Specifications and ratings conform to the following standards: ISO 14397-1, SAE** J1197, SAE J732, CEN*** EN 474-3. The rated operating load for a loader equipped with a pallet fork is deter- mined by: • SAE J1197: 50% of full turn static tipping load or hydraulic limit. • CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit. • CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit. ** *ISO — International Organization for Standardization * **SAE — Society of Automotive Engineers ***CEN — European Committee for Standardization †Rated load is determined by considering % of machine stability, hydraulic lift capacity, and hydraulic tilt capacity. Please contact your dealer to properly select the machine configuration for handling target payloads in your specific machine application. Machine and work tool availability varies by region. Contact your local Cat dealer for product availability.
Edition 47 23-275
Made with FlippingBook