Caterpillar Performance Handbook, January 2017, SEBD0351-47

Lifting Capacities ● MH3024 (Grenoble Sourced)

Material Handlers

Lift Capacities All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (11,470 lb), heavy lift on.

Load point height

Load over front

Load over rear

Load over side

Load at maximum reach (sticknose/bucket pin)

Undercarriage

Boom

Stick

MH or Standard

22'4" MH

15'9" Straight Stick

15 ft

20 ft

25 ft

30 ft

35 ft

ft

Undercarriage configuration MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown MH – stabilizers up – solid tires MH – stabilizers down – solid tires Lower (std UC) – f. stabilizer & r. dozer up Lower (std UC) – f. stabilizer & r. dozer down Lower (std UC) – f. dozer & r. stabilizer up Lower (std UC) – f. dozer & r. stabilizer down Lower (std UC) – 2 sets stabilizersup Lower (std UC) – 2 sets stabilizersdown

*18,000 *18,000 17,000 *18,000 *18,000 *18,000 *18,000 *18,000 16,400 *18,000 *18,000 *18,000 *18,000 *18,000 16,400 *18,000 *18,000 *18,000 *18,000 *18,000 16,500 *18,000 *18,000 *18,000 10,900 10,900 8200 *13,800 *13,800 *13,800 10,800 10,200 7900 *13,800 *13,800 12,000 11,100 9800 7900 *13,800 *13,800 12,300 11,000 10,100 8000 *13,800 *13,800 *13,800 7800 7800 5800 *12,300 *12,300 *12,300 7600 7200 5500 *12,300 *12,300 8500 7900 7000 5500 *12,300 *12,300 8700 7800 7200 5600 *12,300 *12,300 10,400 6300 6300 4600 *11,600 *11,600 10,000 6100 5800 4300 *11,600 11,500 6900 6300 5600 4300 *11,600 10,100 7100 6300 5800 4400 *11,600 10,400 8400 5400 5400 3900 10,900 10,900 8800 5300 5000 3600 10,300 10,100 6000 5500 4800 3600 *11,300 8900 6100 5400 5000 3700 10,600 9100 7300

40 ft

14.86

14,500 14,500 11,000 *18,800 *18,800 *18,800 14,400 13,600 10,600 *18,800 *18,800 15,900 14,800 13,100 10,600 *18,800 *18,800 16,400 14,700 13,500 10,700 *18,800 *18,800 *18,800

35 ft

23.43

14,900 14,900 11,300 10,100 10,100 7600 *19,600 *19,600 *19,600 *16,800 *16,800 15,800 14,700 13,900 10,900 9900 9400 7300 *19,600 *19,600 16,300 *16,800 *16,800 11,000 15,100 13,500 10,900 10,200 9100 7300 *19,600 *19,600 16,700 *16,800 16,000 11,300 15,000 13,800 11,000 10,200 9400 7400 *19,600 *19,600 *19,600 *16,800 16,400 13,400

28.67

30 ft

14,800 14,800 11,300 10,100 10,100 7600 7300 7300 5400 *19,700 *19,700 *19,700 *16,700 *16,700 15,800 14,200 14,200 11,500 14,600 13,800 10,800 9900 9400 7300 7100 6700 5100 *19,700 *19,700 16,200 *16,700 *16,700 11,100 13,500 13,200 8000 15,000 13,400 10,800 10,300 9100 7300 7400 6500 5100 *19,700 *19,700 16,600 *16,700 16,000 11,300 *14,400 11,600 8200 15,000 13,700 10,900 10,200 9400 7400 7300 6700 5200 *19,700 *19,700 19,700 *16,700 16,500 13,400 13,800 11,900 9700 14,400 14,400 10,900 9900 9900 7500 7200 7200 5300 *20,400 *20,400 *20,400 *17,000 *17,000 15,600 14,100 14,100 11,400 14,200 13,400 10,500 9700 9200 7100 7000 6700 5100 *20,400 *20,400 15,800 *17,000 *17,000 10,900 13,400 13,100 7900 14,600 13,000 10,500 10,100 8900 7100 7300 6400 5100 *20,400 *20,400 16,200 *17,000 15,800 11,100 *14,500 11,500 8100 14,600 13,400 10,600 10,000 9200 7200 7200 6600 5100 *20,400 *20,400 19,200 *17,000 16,200 13,200 13,700 11,900 9600

25 ft

32.28

34.78

20 ft

22,000 22,000 16,300 13,700 13,700 10,300 9600 9600 7100 7000 7000 5100 5300 5300 3800 4900 4900 3400 *27,800 *27,800 *27,800 *21,500 *21,500 *21,500 *17,500 *17,500 15,200 13,900 13,900 11,200 10,700 10,700 8600 10,000 10,000 8100 21,900 20,400 15,700 13,500 12,800 9800 9400 8900 6800 6800 6500 4900 5100 4900 3600 4700 4500 3200 *27,800 *27,800 24,400 *21,500 *21,500 15,100 *17,500 *17,500 10,500 13,200 12,900 7700 10,100 9900 5800 9400 9300 5400 22,500 19,800 15,700 14,000 12,400 9800 9700 8600 6800 7100 6200 4900 5400 4700 3600 4900 4300 3200 *27,800 *27,800 25,300 *21,500 *21,500 15,500 *17,500 15,400 10,700 *14,500 11,300 7900 11,300 8700 6000 10,600 8100 5600 22,400 20,300 15,800 13,900 12,700 10,000 9600 8800 6900 7100 6500 4900 5300 4800 3600 4900 4500 3300 *27,800 *27,800 *27,800 *21,500 *21,500 18,500 *17,500 15,800 12,800 13,500 11,700 9400 10,400 9000 7200 9700 8400 6700

15 ft

36.42

*Limited by hydraulic rather than tipping load. (continued on next page) Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information.

9-70 Edition 47