EoW March 2007

technology news

Videx hand feed cold formers

Videx is offering open die cold formers for long fasteners, with 1 or 2 dies up to 200 ton heading. The machines are offered either fully automatic from coil, semi-automatic from magazine or hand fed manually by an operator. The hand feed cold formers are an inexpensive solution for production of small and medium size batches of long parts, headed, collared or extruded. The machines are very efficient for long parts or for parts which require long strokes. The gripper dies are mounted in an independent block which is lifted by a pneumatic cylinder and then slides out of the machine, enabling a change-over in minutes. The stroke is adjusted by an easily accessible nut at the back part of the machine. The machine is designed with a slim body that enables feeding of pre-bent parts either from the front or the side. Videx Machine Engineering – Israel Fax : +972 3536 4802 GER SA, Belgium, is specialised in the sale of new and second-hand machinery for the wire and cable and tube and sheet works for the ferrous and non-ferrous industry. As well as selling single machines the company has complete plants for steel rod and wire, non-ferrous wire, steel ropes and electrically insulated cables available. A large stock of machinery is immediately available, but GER will also search for the correct equipment to completely satisfy customer demand. Delivery, installation and the training of operators complete the service offered by the company, which was formed in 1980. Email : videx@videx.co.il Website : www.videx.co.il Plant and machine specialists at GER

Hex Washer Bolts, headed on Videx Rod Header

▲

GER SA – Belgium Fax : +32 8726 0201 Email : ger@ger.be Website : www.ger.be

61

EuroWire – March 2007