Pole Line Hardware Supplements (5-53Supp1-19)

NOTE: This page replaces information on Catalog Page 5-37, dated February 2007.

SUPPLEMENTAL CATALOG BULLETIN 5-53.1 November 2007 REVISED November 2007

Pins, Crossarm

Nylon Threads • Eliminate handling and disposal concerns associated with Lead threads. • Nylon threads by Hubbell Power Systems meet all ANSI performance and dimensional requirements. • Insulator fit is firm, yet resilient. • Nylon threads are more impact resistant than on pins with Lead threads. Low Voltage Forged Steel Pins – Long Shank for Wood or Composite Crossarms 1" ANSI Standard Nylon Threads Galvanized per ASTM A-153

1" Nylon Thread

The forged design of low voltage insulator pins includes flats for wrench engagement and a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown.

Dimensions

C

ANSI Load Rating at 10 degree Deflection

Approx. Ship Wt. per 100 pcs.

A B C D E F

Catalog Number

Washer Size

Min. Thread Length

Shank Dia.

Shank Length

Shaft Height

Base Dia.

Wrench Square

F

2" sq. x 1 / 8 " 2" sq. x 1 / 8 " 2" sq. x 1 / 8 " 2" sq. x 1 / 8 "

881P* †

5 / 8 "

5 3 / 4 "

3 / 4 "

1000 lbs.

148 lbs.

5"

3"

2"

E

5 / 8 "

6 1 / 2 "

3 / 4 "

881AP*

1000 lbs.

156 lbs.

5"

3"

2"

5 / 8 "

5 3 / 4 "

3 / 4 "

884P*

800 lbs.

161 lbs.

6"

3"

2"

B

5 / 8 "

6 1 / 2 "

3 / 4 "

883P*

800 lbs.

164 lbs.

6"

3"

2"

D

*ANSI Standard C135.17 † RUS Listed, Category f

Hardware includes Square Washer, Square Nut and M-F Locknut

A

Low Voltage Forged Steel Pins – Short Shank for Steel Crossarms 1" ANSI Standard Nylon Threads Galvanized per ASTM A-153 The forged design of low voltage insulator pins includes flats for wrench engagement and a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown.

1" Nylon Thread

Dimensions

ANSI Load Rating at 10 degree Deflection

Approx. Ship Wt. per 100 pcs.

A B C D E F

Catalog Number

C

Min. Thread Length

Washer

Shank Dia.

Shank Length

Shaft Height

Base Dia.

Wrench Square

Lock- washer 1000 lbs. 0.94 lbs.

F

886P* †

5 / 8 "

1 1 / 2 "

1 1 / 4 " 2"

3 / 4 "

5"

Lock- washer 800 lbs.

5 / 8 "

1 1 / 2 "

1 1 / 4 " 2"

3 / 4 "

887P*

1.25 lbs.

6"

E

*ANSI Standard C135.17 † RUS Listed, Category f

B

D

Hardware includes Coil Lockwasher and Square Nut

A

® NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2007 Hubbell Incorporated                           Printed in USA ®

POWER SYSTEMS, INC.

Made with