Pole Line Hardware Supplements (5-53Supp1-19)
SUPPLEMENTAL CATALOG BULLETIN 5-53.2 NOVEMBER 2007 REVISED January 2008
Pins, Crossarm
Nylon Threads • Eliminate handling and disposal concerns associated with Lead threads. • Nylon threads by Hubbell Power Systems meet all ANSI performance and dimensional requirements. • Insulator fit is firm, yet resilient. • Nylon threads are more impact resistant than on pins with Lead threads. High Voltage Forged Steel Pins – Long Shank for Wood or Composite Crossarms 1" ANSI Standard Nylon Threads Galvanized per ASTM A-153
1" Nylon Thread
The forged design of high voltage insulator pins includes a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown.
Dimensions
ANSI Load Rating at 10 degree Deflection
Approx. Ship Wt. per 100 pcs.
A B C D E
F
C
Catalog Number
Washer Size
D
Min. Thread Length
Shank Dia.
Shank Length
Shaft Height
Shaft Dia.
Base Dia.
2 1 / 2 " 2 5 / 8 " 2 1 / 4 " sq.
3 / 4 "
6 1 / 2 "
4705P
5"
1"
x 3 / 16 " 2500 lbs. 2.68 lbs.
1"" 2 1 / 2 " 2 5 / 8 " 2 1 / 4 " sq.
3 / 4 "
6 1 / 2 "
4706P
6"
F
x 3 / 16 " 2500 lbs. 2.76 lbs.
B
E
Hardware includes Square Washer, Square Nut and M-F Locknut
A
High Voltage Forged Steel Pins – Long Shank for Wood or Composite Crossarms 1 3 / 8 " ANSI Standard Nylon Threads Galvanized per ASTM A-153 The forged design of high voltage insulator pins includes a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown. 1 3 ⁄ 8 " Nylon Thread
Dimensions
ANSI or RUS Load Rating at 10 degree Deflection
C
Approx. Ship Wt. per 100 pcs.
A B C D E
F
Catalog Number
Washer Size
Min. Thread Length
D
Shank Dia.
Shank Length
Shaft Height
Shaft Dia.
Base Dia.
2 1 / 4 " sq. x 3 / 16 " 2200 lbs. 3.83 lbs.
4717P †
5 / 8 "
7"
7"
1"
4"
3"
3" sq. x 3 / 16 " 3" sq. x 3 / 16 "
3 / 4 "
4326P*
2200 lbs. 4.50 lbs.
7"
7"
1"
3"
3"
F
3 / 4 "
4328P*
1900 lbs. 4.60 lbs.
7"
8"
1"
3"
3"
B
3 / 4 "
10" 1 1 / 16 " 3"
3 1 / 2 " 3" sq. x 3 / 16 "
4332P*
2100 lbs. 5.58 lbs.
7"
*ANSI Standard C135.17 † RUS Listed, Category f (approval pending)
Hardware includes Square Washer, Square Nut and M-F Locknut
E
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2007 Hubbell Incorporated Printed in USA ® ® POWER SYSTEMS, INC.
A
Made with FlippingBook - Online Brochure Maker