Powerdeal EN 2026

Batteries and charging circuits

NEW

Flash 12V and 12/24V multifunction smart battery chargers

ESSENTIAL on all E-TECH vehicles to maintain a continuous voltage of 13V and 120A to 130A during any diagnostic, reprogramming or fault-finding operation. The multifunction battery charger is the go-to tool for the diagnosis protocols and calculator reprogramming. The device has 4 modes and can be used on every type and size of battery. Charging mode: Automatically recharge and recondition all types of batteries, including LifePo4 batteries.. The automatic reconditioning programme will breathe new life into used batteries, thereby extending their service life. Test mode: The battery charger is capable of testing a vehicle’s battery and its starter system. These two tests make it possible to quickly identify any potential problem on a vehicle without any additional equipment. Diagnostics mode: Select the output voltage to adapt the multifunction battery charger to the vehicle’s needs. This mode also be used to test and reprogram the vehicle’s on-board computers in a safe and stable environment. Showroom mode: supplies all the energy required to keep your vehicle in demonstration mode. This allows the vehicle’s lights, electronic systems and auxiliaries to function without damaging or seriously discharging the starter battery. The charger can be hidden away out of sight under the vehicle.

HAND TOOLS AND PROFESSIONAL TOOLS TOOL SETS AND SELECTIONS SPECIALISED AUTOMOTIVE TOOLS WORKSHOP EQUIPMENT

CHB-150-IMP

12V 150A version

M1

GUARANTEE

CHB-150

Printer for Flash CHB-150 multifunction charger

M1

GUARANTEE

Specific printer for Flash 12V multifunction smart battery charger. Input voltage: 200-240V AC Input power: 1800W. Charging current: 12V-100A Maximum charging current: 12V-150A. Frequency: 50/60 Hz Cable length: 3 m. Charging voltage: 12 V Lead-acid battery capacity: 50~1200A. Weight: 460 g Dimensions: 312x303x100mm

Characteristics: Dimensions: 312 x 303 x 100 mm. Input voltage: 200-240 V AC. Input power: 1800W. Charging current: 12 V-100 A. Maximum charging current: 12 V-150 A. Frequency: 50/60 Hz.

Cable length: 3m. Charging voltage: 12V. Lead-acid battery capacity: 50~1200A.

Standalone memory backup unit

Standalone battery chargers

BSM-A

CHB-12...

M1

GUARANTEE

M1

GUARANTEE

Avoids the loss of the vehicle's electronic data (car-radio, alarm, time, miscellaneous data, etc.) when changing or disconnecting the battery. Connects directly to the OBD2 connection socket. Internal dry lead battery 12V 4.5A. Switch. An LED indicator light shows that the device is correctly connected. Protected by a 4A fuse. With 220V or 120V smart charger.

Min. battery capacity (Ah)

Max battery capacity (Ah)

Max output power (W)

Part No. Nominal battery

PRICE

voltage (V) Recommendation

CHB 12A CHB 12B CHB 12C

Motorcycle, car, van Motorcycle, car, van, HGV

2.2

100 160 600

30 W 40 W

6/12 V

20 90

12 V

1350 W

12/24 V Van, HGV, civil engineering

SAM.EU SAM ASSISTANCE SAM ADVICE: +33 (0)4 77 92 13 00

101