Powerdeal EN 2026

Clutch, air conditioning

Electronic universal leak detector R134/1234YF/hydrogen

CLIM-UNIV1

M1

This leak detector with a sensor is designed for detecting the concentrations of hydrogenated nitrogen and other gases in smaller amounts. Compatible with Hydrogenated Nitrogen (N2-H2), R134-a, R1234YF, R404-A, R410-A, R407-C, R22 and Freon. When a concentration is detected, an audible alarm sounds then the display indicates the seriousness of the leak (1 to 7). Characteristics: Sensitivity adjustable on 3 levels, automatic calibration, probe type: semi-conductor, built-in fan, power supply: 4 AA alkaline batteries, battery lifetime: 4-6hrs continuous depending on use, battery low indicator, warm-up time: 45s, probe length: 40cm, supplied in a case with batteries. This leak detection system is the most efficient because it enables the detection of the slightest leaks, where other procedures have failed.

GUARANTEE

HAND TOOLS AND PROFESSIONAL TOOLS TOOL SETS AND SELECTIONS SPECIALISED AUTOMOTIVE TOOLS WORKSHOP EQUIPMENT

3 sensitivity levels

Automatic calibration

Nitrogen / hydrogen leak detection box set (n2-h2) 50 bar

This kit is used to pressurise refrigeration and air conditioning installations in order to simulate, inside those systems, the pressure at which this system should then operate. By pressurising the installation with technical hydrogenated nitrogen (at an appropriate pressure and therefore different depending on the refrigerants as indicated by the sectors visible on the pressure gauge), the installation operator will be certain, if there are leaks owing to poor clamping, cold junctions or manufacturing defects, that these imperfections will be shown by a loss of nitrogen detected by the pressure gauge provided for this purpose. Once it has been checked in this way, the installation will no longer have this type of problem. Composition: Case, pressure-relief unit with safety valve going up to 50 bar, shut-off pressure gauge + 100 cm hose, reduction valve for 1 kg cylinder, 1 kg cylinder of hydrogenated nitrogen (N2-H2), 150 cm pipe, high-pressure coupling, specific high-pressure coupling for R1234YF gas. Compatible with R134 and 1234YF gas

CLIM-UNIV2

M1

GUARANTEE

Compatible with R134A and R1234YF gas

SAC clutch aligner

EX SAC

GUARANTEE A growing numbers of cars are equipped with SAC clutches (Self Adjusting Clutch). These clutches are self-adjusting. Thanks to the automatic adjustment mechanism, they compensate for the increase in play caused by the wear of the clutch disc. The SAC system guarantees a clutch force that is constant over time, and increases user comfort. Suitable for most SAC clutches (3 and 4 holes) fitted to FIAT, VW, AUDI, BMW, MERCEDES, VOLVO, OPEL, RENAULT, PSA group vehicles, etc. Advantages: Pre-tightening of the disc on the plate during assembly and removal, thus avoiding any deformation of the clutch. Clutch disc alignment.

SAM.EU SAM ASSISTANCE SAM ADVICE: +33 (0)4 77 92 13 00

123