Powerdeal EN 2026

Jacks and accessories for heavy goods vehicles

20-40-T HGV hydropneumatic jack Hydropneumatic jack, for all types of heavy vehicles, operated by a hydropneumatic pump, the piston retracts automatically and the double descent valve maintains a constant, controlled speed with the load and even increases it when unloaded. These valves guarantee perfect support for the load, even in the case of an accidental rupture of any air or oil pipe. It is made of special materials that guarantee its performance, quality and resistance to breakage even in the most extreme situations. It complies with the MACHINERY DIRECTIVE

Hydropneumatic jack with short body and wide head 20 to 40 T

98/37/EC and is approved as per EUROPEAN REGULATION EN 1494. Air supply pressure: 8 > 10 bar Operating temperature: -20°C to +50°C. Air consumption: 400 L / min Compressed air system hose: Rilsan

CRH215N

| RQGCL215N

HAND TOOLS AND PROFESSIONAL TOOLS TOOL SETS AND SELECTIONS SPECIALISED AUTOMOTIVE TOOLS WORKSHOP EQUIPMENT

diameter 6x4 mm. Compatible oil: ATF Dexron IID. Three models of hydropneumatic jacks are available to suit every application in heavy vehicle servicing and maintenance workshops.

M1

GUARANTEE

Hydropneumatic jack 18-30-60 T HGV

Hydropneumatic jack 20-40-T HGV

CRH315L

CRH215NB

| RQGCL315L

M1

GUARANTEE

M1

GUARANTEE

Control of the lowering speed. Cylinder: fully hard chrome-plated, double sealing. Valve and safety valve in case of overloading. "Dead man's handle" function. Oil circuit with check valve. Impact protection for wheels against buckling. Ultra-robust shell. Robust control wheel and arm with ultra-low position. Supplied with 2 extensions, 45 and 75 mm.

Hydropneumatic jack, for all types of heavy vehicles, operated by a hydropneumatic pump, the piston retracts automatically and the double descent valve maintains a constant, controlled speed with the load and even increases it when unloaded. These valves guarantee perfect support for the load, even in the case of an accidental rupture of any air or oil pipe. It is made of special materials that guarantee its performance, quality and resistance to breakage even in the most extreme situations. It complies with the MACHINERY DIRECTIVE 98/37/EC and is approved as per EUROPEAN REGULATION EN 1494. Air supply pressure: 8 > 10 bar. Operating temperature: -20°C to +50°C. Air consumption: 400 L / min. Compressed air system hose: Rilsan diameter 6x4 mm. Compatible oil: ATF Dexron IID 3 models of hydropneumatic jacks are available to suit every application in heavy vehicle servicing and maintenance workshops.

160 mm pad for hydropneumatic jack CRH...

Long hydropneumatic jack 20-40-T HGV

CRH-COUP1

CRH215LB

M1

GUARANTEE

Pad dimensions: Max. height: 78 mm. Min. height: 60 mm. Diameter: 160 mm.

M1

GUARANTEE

Protection for the truck: While protecting the edge of the truck. The groove provides an optimal fit. Prevents the jack from slipping easily in addition to protecting the underside of the truck. Material: Steel

Control of the lowering speed. Cylinder: fully hard chrome-plated, double sealing. Valve and safety valve in case of overloading. "Dead man's handle" function. Oil circuit with check valve. Impact protection for wheels against buckling. Ultra-robust shell. Robust control wheel and arm with ultra-low position. Supplied with 2 extensions, 75 and 125 mm .

Side view

Extensions for jack CRH215NB

Top view

CRH-RA45 CRH-RA75 CRH-RA125 CRH-RA45

GUARANTEE

GUARANTEE

GUARANTEE

45 mm in height

75 mm in height

125 mm in height

SAM.EU SAM ASSISTANCE SAM ADVICE: +33 (0)4 77 92 13 00

131