Workholding Solutions Master Catalog
PRODUCTION VISES
WORKHOLDING SOLUTIONS GROUP
Production Vises – 4" (100mm) Narrow Base
Wt. lbs/Kg
Part No. 49401
30/14
The Narrow Base Vise can be mounted as a stand-alone vise with traditional strap clamps. The narrow base has 2 locating holes for 12mm dowel pins and 2 locating holes for sine fixture keys to align vise in T-slots. Keys for inch and metric T-slots shown on page 152. Recessed mounting holes (3) are also provided for top mounting to fixture plates with socket head cap screws. Tapped mounting holes (6) are provided for bottom mounting. The slim design allows a high density of vises on machine tables, tombstones, or columns. Maximize flexibility by utilizing the Jergens Ball Lock ® Quick Change Mounting System. See page 122.
• Easy to mount to Ball Lock ® or other fixture plates
Mounting Dimensions
Universal Base
PRODUCTION VISES
Wt. lbs/Kg
Part No. 49471
30/14
UNIVERSAL BASE PRODUCTION VISE 4" / 100MM The Universal Base Vise is easily mounted directly to machine tool tables. Slotted mounting holes will match almost any table slot pattern. Location holes are provided for Jergens Sine Fixture Keys, to provide easy and accurate alignment with table slots.
• Easy to mount directly to machine tables
Mounting Holes (2) Plcs: 17/32" [13.5]
6.00 [150]
17/32" (4) Plcs [13.5] Slotted Mounting Holes:
3.13 [80]
2.50 [63.5]
4.00 [100]
1.22 [30]
2.063 [52.5]
6.00 [150]
7.00 [175]
3.370 [85.6]
1.25 [32]
Mounting Dimensions
Locating Holes: .6255 (4) Plcs For Sine Fixture Keys [16]
Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com
125
Made with FlippingBook - Online catalogs