Workholding Solutions Master Catalog

10.00 [248]

PRODUCTION VISES

0.50 [12]

4.00 [100]

0.96 [24]

4.50 [114]

WORKHOLDING SOLUTIONS GROUP

1.45 [38]

Production Vises – 6" (150mm)

10.50 [254]

10.00 [248]

3.75 [88]

3.00 [78]

0.50 [12]

Machinable Area

0.60 [15]

5.00 [127]

4.00 [100]

0.96 [24]

4.50 [114]

1.00 [25]

0.25 [6]

1.45 [38]

1/4 [6.4]

Vise With Hard Jaws Carrier Set and hardened steel inserts

0.80 [20]

20.00 [508]

Vise With Machinable Soft Jaws

10.50 [254]

3.75 [88]

3.00 [78]

0.60 [15] Clamping Force Jergens 6" (150mm)

Machinable Area

5.00 [127]

1.00 [25]

Features and Benefits: • Compact design in 3 extruded aluminum base styles for easy setup and to reduce weight on worktable. • Fully sealed, patented lead screw assembly for long maintenance free service. Openings allow chips to flow out of the vise base. • Hardened stainless steel rails, ground within ±0.001" (0.025mm) provide precise location, resist wear and provide strong support to jaws.

0.25 [6]

0.80 [20] • Supplied with aluminum soft jaws, fully machineable and reversible. Additional jaws can be ordered separately, see page 148. Alternate jaw types can be ordered with the vise base by adding the following suffix to the part numbers: -H for Jaw Carrier Set with Hardened Steel Inserts -S for machineable Steel Jaws -T for extra Tall aluminum jaws sets -W for extra Wide aluminum jaw sets

Torque

Clamping Force

ft. lbs

N•m lbs

kgf

20 30 40 50 60 70 80 90

27 41 54 68 81 95

3,600 1,630 4,500 2,040 5,300 2,400 6,200 2,800 7,200 3,250 8,400 3,800 9,200 4,150

1/4 [6.4]

20.00 [508]

108

122 10,100* 4,550*

Maximum Clamping Range With Shaped Jaws Dual Station: 9.2" (233mm) Single Station: 19.5" (495mm)

*Recommended Maximum

Ball Lock ® Base The Ball Lock ® Base Vise is for use with the Jergens Ball Lock ® Quick Change Mounting System. The base has a “jigsaw” pattern to allow the vises to be mounted close to each other. For more information about Ball Lock ® , see pages 122–123.

PRODUCTION VISES

Mounting Dimensions

20.00

12.00

6.00

Inch

6.00

20mm Primary Liners (2) Plcs

Ball Lock ® Shank Part No.

Shank Size

4.00

1.45

Part No. 49406

Wt.

8.00 9.92

0.75

3.370 ±0.001

49601

68 lbs

20mm x 3/4"

Clearance Hole For Holddown

508

300

150

150

20mm Primary Liners (2) Plcs

Metric

100

38

200 250

Ball Lock ® Shank Part No.

Shank Size

85.6

Part No. 69406

Wt.

20

49651

31 Kg

20mm x 20mm

Clearance Hole For Holddown

Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com

127