Workholding Solutions Master Catalog
PRODUCTION VISES
WORKHOLDING SOLUTIONS GROUP
Production Vise Columns – 4" (100mm) 3-Sided
The 3-Sided Columns have six workstations, and may provide greater access to three or more sides of your work pieces. This design is especially beneficial on machining centers with large spindles. No need to sacrifice tool rigidity for access, by having tools extended too far from the tool holders. The universal base mounts directly to most HMC tables using the provided mounting holes on 80mm or 100mm centers. Further reduce set-up time with the Jergens Ball Lock ® Mounting System to your HMC. Exchange your vise columns and all other fixtures in less than a minute. Location of all fixtures will repeat within ±0.0005" (±0.013mm)or better.
Ball Lock ® Mtg. Pattern
120˚
H
Q
J
Tri-column design allows up to 240° accessibility
3-Sided 4" Vise Columns
Part Number 49409 49473
Base Width
Base Length
Ball Lock ® Mtg Pattern
Mounting Pattern 1*
Mounting Pattern 2*
Mounting Pattern 3*
Weight (lbs)
Ball Lock ® Part No.
Mounting Ball Lock ® Universal
H J Q
Shank Size 20mm x 1"
49602
9.55 4.00 4.22 15.75 15.75 14 x 14
n/a
n/a
n/a
125
9.55 4.00 4.22 11.81 11.81
n/a
80mm 100mm 125mm 115
—
—
3-Sided 100mm Vise Columns Metric Bases
Part Number 69409 49473
Base Width
Base Length
Ball Lock ® Mtg Pattern
Mounting Pattern 1*
Mounting Pattern 2*
Mounting Pattern 3*
Weight (Kg)
Ball Lock ® Part No.
Mounting Ball Lock ® Universal
H J Q
Shank Size
PRODUCTION VISES
49652
225 100 90 400 400 350 x 350
n/a
n/a
n/a
57
20mm x 25mm
225 100 90 300 300
n/a
80mm 100mm 125mm 52
—
—
* Bases on Universal Columns are provided with two sets of mounting holes, to fit grids or T-Slots on 80mm and 100mm centers. Custom mounting patterns and base sizes are available upon request.
Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com
137
Made with FlippingBook - Online catalogs