Workholding Solutions Master Catalog

PRODUCTION VISES

WORKHOLDING SOLUTIONS GROUP

Production Vise Accessories Jaws & Fixture Plates Jaws • Standard fully machinable soft jaws, as supplied on the Production Vises and Columns • Extra Wide fully machinable soft jaws. (-W) • Extra Tall fully machinable soft jaws. (-T) • Hard Jaw Carriers are drilled and tapped to accept hard jaw plates. (-H) • Hard Jaw Plates are hardened steel plates that bolt onto the hard jaw carriers. (-H) Jaws are offered three ways: • Jaw Sets include two moveable jaws and one fixed jaw.

Machinable Soft Jaws (Standard Sets included with Vises)

A • Moveable Jaws are sold in pairs • Fixed Jaws are sold separately. Quick Change Fixture Plates

Hard Jaw Carriers With Steel Inserts*

C

Fixture plates provide an alternative to holding parts in the jaws. Build dedicated fixtures on the plates, and then just snap onto a vise or column. Switch between jaws and fixture plates without removing the vise or column from the machine.

B

A

C

D

Quick Change Fixture Plate

E

B Quick Change Fixture Plates for 4" (100mm) Production Vises Part No. Description A B C D E 49446 Standard Fixture Plate 4 14.90 1.475 .25 .50 49448 Wide Fixture Plate 6 14.90 1.475 .25 .50 Quick Change Fixture Plates for 6" (150mm) Production Vises Part No. Description A B C D E 49447 Standard Fixture Plate 6 19.90 1.475 .25 .688 49449 Wide Fixture Plate 8 19.90 1.475 .25 .688 E

PRODUCTION VISES

D

NOTE: Conversion plates include mounting screws. • Allows for easy conversion from twin station to single station vise • Hard coat anodized aluminum Vise Conversion Plates Part No. Vise Size 49440 4"/100mm 49441 6"/150mm

Vise Handles

Vise Work Stop

Part No.

Vise Size

Part No.

Type

49442

49444

4"/100mm

Double Pivot

49443

49459

6"/150mm

Single Pivot

• Ergonomic Design • 5/8" Hex Size

• Easily mounts to side of twin vise • Allows for precise part location

Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com

149