Workholding Solutions Master Catalog

PRODUCTION VISES

WORKHOLDING SOLUTIONS GROUP

Production Vise Ball Lock ® Accessories – Inch

BALL LOCK MOUNT I NG SYS TEM

Ball Lock ® Shanks

Shank with Thumbscrew

Shank Diameter

Fixture Plate Thickness

Standard Shank

Jigsaw Fixture Plate

49601 49601-S 49602 49602-S

20 20 25 25

3/4

Clearance hole for holddown

1"

49611 49612

49611-S 49612-S

3/4

1"

Thumb Screw

Standard Shank

6.0000

12.0000

Jigsaw Interlocking Fixture Plates Plate Part No. Jig Saw Pattern Plate Thickness Outer Dimensions

Use With Vise No.

Wt. (lbs)

28705 28706

49401 49402

6 x 12 8 x 12

3/4 3/4

8 x 15

9 9

10 x 16

PRODUCTION VISES

Ball Lock ® Fixture Plates for Multiple Production Vises

Jergens manufactures standard Ball Lock ® Fixture Plates for various applications. A small sample is listed below. These fixture plates will accept multiple Jergens Production Vises. However, the Jergens Ball Lock ® Mounting System can provide the greatest benefits, when designed for your specific applications and your machine tools. Please contact Jergens Technical Service to select the proper fixture and sub-plate for your applications.

Multiple Vise Fixture Plate

Clearance holes for holddown (2) Plcs

5/8" Bored hole for sine fixture key (2) Plcs

Plate Part No.

Ball Lock ® Pattern

Shank Diameter

Plate Thickness

Outer Dimensions

Vises/ Plate

Use With Vise No.

Wt. (lbs)

28713 28715 28727 28727 *28742

49401 49401 49401 49402 49401

12 x 12 12 x 12 17 x 17 17 x 17 8 x 22

20mm 3/4 20mm 3/4 25mm 1" 25mm 1" 25mm 1"

14 x 14 16 x 16 20 x 20 20 x 20 12 x 25

2 2 3 2 2

14 18 38 38 28

Primary Liners (2) Plcs

*Fits Jergens Tooling Column 69011

Ball Lock ® Sub-Plates for Ball Lock ® Vises, Columns, and Fixture Plates

Jergensmanufactures standard sub-plates for popular machine tools. Three standard plates are shown. These sub-plates will accept Jergens Ball Lock ® Vises, Columns and Fixture Plates. Some of the sub-plates have multiple mounting patterns that will allow multiple sizes and styles

of fixture plates and vises to be used on the same machine. However, the Jergens Ball Lock ® Mounting System can provide the greatest benefits, when designed for your specific applica tions and your machine tools. Please contact JergensTechni cal Service to select the proper sub-plate for your machine.

Plate Part Number

Machine Type

Table Size

Ball Lock ® Pattern

Applications

49102

HMC HMC VMC

400mm 500mm

14x14

Vise Columns, Tooling Columns, Other Vise Columns, Tooling Columns, Other

49103-C

17x17&14x14

49112

20x40

Multiple Patterns

Jigsaw Vises & Plates, Multiple Vise Fixtures, Other

Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

150