Workholding Solutions Master Catalog

POWER CLAMPING

WORKHOLDING SOLUTIONS GROUP

Swing Cylinders

WARNING: All swing cylinders must be used with flow limit valves to dampen the rotating action. Please see maximum flow rate shown below. These versatile swing cylinders/clamps can be used as single or double acting rotating clamps, or push/pull cylinders. The piston in the Swing Cylinders rotate 90 ° to the right, but may easily be changed to 90 ° left rotation, or to no rotation at all.

• Standard with an arm • Can be mounted using four #10 cap screws or the 1"-12 thread on the O.D. of the cylinder • Optional components include the threaded mounting bracket and jam nut shown below • Can be used as a non-rotating clamp • Maximum recommended flow rate is 20 cubic inches per minute per clamp (approximately 1 second clamp time) • Note: Arm length can affect clamping pressures. See chart at right for more information.

POWER CLAMPING

Specifications

Clamp (Pull)

Return (Push)

60680 Swing Cylinder Operating Volume (cu in) Effective Piston Area (sq in)

.18 .24 120 730 .75 .50 .25

.33 .44

MinimumOperating Pressure (psi) MaximumOperating Pressure (psi)

—

3000

3000 1320

MaximumOutput Force (lbs)

.75 .50 .25

Stroke (in): Full

Rotating Clamping

Weight (lbs)

1

1

Accessories

Double Arm

Mounting Block

Part Number 60953 60964 60923

Description

Mounting Block

See page 176

Hex JamNut

Optional Double Arm

Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

166