Workholding Solutions Master Catalog
POWER CLAMPING
WORKHOLDING SOLUTIONS GROUP
Swing Cylinders Large
• Standard without an arm. • Socket Head Cap Screw is included. • Single or double arms are available.
• Can be mounted using four 3/8" cap screws, or the 1 7/8"-16 O.D. thread of the cylinder.
• Optional components include a jam nut or a mounting bracket to replace old Jergens part number 60621. • Can be used as a non-rotating clamp. • Maximum recommended flow rate is 90 cubic inches per minute per clamp. (Approximately 1 second clamp time.) • Note: Arm length can affect clamping pressures. See chart, page 166, for more information.
Specifications
Clamp (pull)
Return (push)
WARNING: All swing cylinders must be used with flow limit valves to dampen the rotating action. Please see maximum flow rate shown above.
60681 Swing Cylinder Operating Volume (cu in) Effective Piston Area (sq in)
1.5
2.7
.98
1.77
MinimumOperating Pressure (psi) MaximumOperating Pressure (psi)
200
—
3000 3000 2900 5300
MaximumOutput Force (lbs)
1.5
1.5
Stroke (in): Full
Rotating Clamping
1
1
Jam Nut Part Number 60967 See page 176.
.50
.50
Weight (lbs)
5
5
POWER CLAMPING
Accessories
Single Arm Part Numbe 60921
Double Arm Part Number 60922
Mounting Bracket Part Number 60954
Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com
167
Made with FlippingBook - Online catalogs