Workholding Solutions Master Catalog

POWER CLAMPING

WORKHOLDING SOLUTIONS GROUP

Threaded Cylinders Pressure Points

Jergens Pressure Points may be used with any power source and are designed to be used in restricted areas where space is at a minimum. Pressure Points can be used to eliminate part distortion during machining operations or to hold large diameter castings or rings in place while machining the upper surface. Pressure Points have hardened tool steel tips (50-60Rc). Jam nuts are included. Not suitable for air operation.

Specifications Part Number

61512 61514

Operating Stroke (in.)

3/16

3/16

Operating Volume (cu. in.)

.037

.037

Effective Piston Area (sq. in.)

.20

.20

MinimumOperating Pressure (psi)

400

400

MaximumOperating Pressure (psi)

5000

5000

MaximumOutput Force (lbs.)

1000

1000

Weight (lbs.)

.5

.6

Part Number 61512

Part Number 61514

Miniature Cylinders

Small, fully-threaded bodies ensure easy mounting and simple length adjustments. Their small size provides high workholding forces in tight places. Threaded Cylinders have hardened piston rods, steel bodies, alloy springs and Teflon ® back-up rings which ensure trouble-free operation and long life. Not suitable for air operation. For mounting, see brackets on page 176. Jam nuts are included.

POWER CLAMPING

Specifications Part Number

60461 60462

Operating Stroke (in.)

3/16

1/2

Operating Volume (cu. in.)

.018

.049

Effective Piston Area (sq. in.)

.096

.196

MinimumOperating Pressure (psi) 300 MaximumOperating Pressure (psi) 10000 10000 MaximumOutput Force (lbs.) 960 1960 Weight (lbs.) .5 .7 200

Part Number 60461 60462

Body Thread

End Port

Stroke

A

B

C

D

E

F

3/16

1/2-20 1 13/16 1 9/16

1/4

3/16

3/8

7/16

1/16-27 NPTF 1/8-27 NPTF

1/2

3/4-16

2 3/8

2

5/16

1/4

21/32

5/8

Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com

173