Workholding Solutions Master Catalog

POWER CLAMPING

WORKHOLDING SOLUTIONS GROUP

Standard Cylinders Mounting Brackets

Mounting Brackets are designed to save you time and money when laying out your fixture. All Mounting Brackets are made of low carbon steel, which is not heat-treated. This allows you to custom fit or weld the brackets into your fixture. The cylinder clamping area is concen tric to the OD of the various cylinders to avoid distortion of the cylinder walls which may cause damage to the piston. Spacers may be used to add height to the cylinders when using

Jergens Mounting Brackets. • Material: Low Carbon Steel • Finish: Black Oxide • Bore Tolerances: +.0005 -.0010

(2 Bolts Supplied) I

Part Number 60901 60902 60903

Tap F

Wt. (lbs)

A B

C D

E

G H

1 1/4 3 3/4 2 3/8 1 1/2 1.00 1/2-13 3/4 2 3/8-16 x 4 2.75

1 1/4 4 3 1/2 2 1/8 1.50 3/4-10 1 2 1/2-13 x 4 1/2 3.5

1 1/4 4 1/2 4 3/8 3 1/4 2.50 3/4-10 1 1/2 2 5/8-11 x 5 4.75

POWER CLAMPING

(2 Bolts Supplied) J

Part Number

Tap F

Wt. (lbs)

A B

C D

E

G H

I

60904

1 1/4 3 3/4 2 3/8 1 1/2 1.00 1/2-13 3/4 2 2 9/16 3/8-16 x 1 1/2 2.7

60905 60906

1 1/4 4 3 1/8 2 1/8 1.50 3/4-10 1 2 2 1/2 1/2-13 x 1 1/2 3.5

1 1/4 4 1/2 4 3/8 3 1/4 2.50 3/4-10 1 1/2 2 2 7/16 5/8-11 x 1 1/2 4.7

(2 Bolts Supplied) G

Part Number 60907 60908 60909

Wt. (lbs)

A B

C D E

F

1 1/4 1 1/2 2 3/8 1 1/2 1.00 3/4 3/8-16 x 1 3/4 .95

1 1/4 2 3 1/8 2 1/8 1.50 1 1/2-13 x 2 1/4 1.50

1 1/4 3 4 3/8 3 1/4 2.50 1 1/2 5/8-11 x 3 1/4 2.75

Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: workholding@jergensinc.com | www.jergensinc.com

179