Workholding Solutions Master Catalog
POWER CLAMPING
WORKHOLDING SOLUTIONS GROUP
Staylock Clamps
Swing Clamps
Jergens StayLock Swing Clamps are designed to be used when accessible loading and unloading of a workpiece is required. The clamping arm rotates 80° away from the workpiece. The Swing Clamp operates in any position and is sealed so it can be used with coolant applications. Important: When using the High Volume Air-Powered Hydraulic Pumps (61761 and 61762), the Flow Limit Valve (shown below) must be used to limit the flow of hydraulic oil going to the clamp port of the Swing Clamp. This will extend the life of the clamp by minimizing the clamp arm from slamming into the clamping position.
RELEASE
9/16-18 PORTS
U.S. Patents: No. 4,511,127 No. 4,471,293
CLAMP
2 1/2
POWER CLAMPING
80° SWING RIGHT HAND
17/32
Specifications Part Number (Right Swing) Part Number (Left Swing)
3/8-16 THREAD
2 3/4
4 9/16
62823
1 1/16
62824
4 3/32
Operating Volume (cu. in.)
1
1 1/8
2 29/32
MinimumOperating Pressure (psi)
80*/300
MaximumOperating Pressure (psi)
3,000
1 1/8
Force to Pressure Ratio
1.3:1
5/8 Clamp Arm Has 3/16" Of Vertical Travel
Clamping Stroke
.18
MaximumOutput Force (lbs.) @ 3,000 (psi)
3,900
The Flow Limit Valve restricts the flow of oil to dampen the rotating action of the Swing Clamp. It is recommended that the Flow Limit Valve be used with the High Volume Air-Powered Hydraulic Pump (61761 or 61762). It is not needed with the lower volume "Shoebox" Pumps (61755 or 61756).
Weight (lbs)
11
*80 psi to swing, 300 psi to clamp.
Flow Limit Valves
Part Number 61648
Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
194
Made with FlippingBook - Online catalogs