Workholding Solutions Master Catalog

POWER CLAMPING

WORKHOLDING SOLUTIONS GROUP

3 Second Clamping Kit

To simplify the installation of Jergens power clamps, Jergens offers its 3 SECOND Clamping Kit. The Kits contain everything required to convert your shop air pressure to hydraulic power for your clamping fixture. 61717 —This kit contains a 61711 booster, control valve, gage, hoses and fittings. This kit should be used for fixtures which will remain on a machine for long periods of time, such as a vise on a milling machine. 61719 —This kit contains a 61705 booster, control valve, filter-regulator, pilot check valve, quick disconnects and all hose and fittings required. This kit should be used on machines where the fixture changes frequently. The 61705 booster eliminates the need to bleed each fixture after it is connected. To change the fixture, simply switch the hydraulic hose from one fixture to the other using quick disconnect fittings. Selection Data

Included In Kit

Part Number

Booster

Accessories* 2, 3, 4, 6, 8, 9

POWER CLAMPING

61717 61719 61716 61718

61711

61705

1, 2, 3, 4, 5, 6, 7, 8

61710

2, 3, 4, 6, 8, 9

61704

1, 2, 3, 4, 5, 6, 7, 8

*As shown on page 199 .

Pre-Fill Power Pacs

Jergens Pre-Fill Power Pacs provide a complete portable power source. Everything required to power and control your hydraulic fixture is included. Connect your shop air to the filter/regulator, and your fixture to the hydraulic hose. The self bleeding feature and the hydraulic quick disconnects (provided) make these units the ideal power sources for job shops and production lines.

• Completely Assembled • Self Contained • Portable

• Self Bleeding • Fast Set-Up

Selection Data

Included In Power Pac

Part Number

Booster

Accessories* 1, 2, 3, 5, 6, 7, 8

61714 61715

61704

61705

1, 2, 3, 5, 6, 7, 8

*As shown on page 199 .

Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

200