Anchor Tools 4A (CA06122E)

PORTABLE ANCHOR INSTALLER FOR SMALL FOUNDATIONS

This compact installer can be used for most shaft-driven guy anchors and smaller screw foundations in areas where large equipment cannot go or is impractical. A hydraulic power supply, such as the CHANCE Portable Hydraulic Power Supply (see page 4A-12), providing 1,900 psi at 8 gpm flow rate is required to deliver the maximum torque output of 2,500 ft∙lb. For Installing Torque up to 2,500 ft∙lb in Restricted-Access Locations Features and Benefits

• Torque bar transmits the counter-torque generated by anchor installation from the drive head to the earth or other restraint, freeing the operator for the task of guiding the anchor path • Torque bar telescopes from 8 feet to 10 feet as needed • Pivoting drive head enables easy adjustment of installation angle • Built-in bypass valve limits output to 2,500 ft∙lb maximum • Two-way foot control gives the operator direct control over drive and reverse directions • Includes two 12.5-ft hoses and two 25-ft hoses with quick couplers for all connections from power supply to foot control to drive head • Sealed, oil-filled gear case • 2" hex output shaft - Kelly Bar Adapter 630013 and the appropriate drive tool (each sold separately) are required for anchor installation

Portable Anchor Installer

Replacement Parts

Catalog No.

Description

Weight (lb)

Catalog No.

Description

Weight (lb)

Complete Portable Anchor Installer kit (drive head, yoke,

C3031233 2,500 ft∙lb drive head assembly

108

C3031244

230

C3031247

Foot control assembly

47

torque bar, hoses, and foot control)

C4176121

One 25-ft hose assembly

12

E3030680

Yoke assembly

21

E3031041

Torque bar assembly

30

E3031253

Two 12.5-ft hose assemblies

12

©2022 Hubbell Incorporated | hubbellpowersystems.com

Page 4A-11