2-10 Warranty Guide
25
ITEMS COVERED UNDER THE WORKMANSHIP WARRANTY COVERAGE
6.1 DOORS: INTERIOR AND EXTERIOR CONTINUED
Excessive opening at the bottomof interior doors.
Deficiency
Construction Performance Guidelines Builder/Seller Responsibility
Passage doors from room to room that have openings between the bottomof the door and the floor finishmaterial in excess of 1 1/2 inches are deficiencies. Closet doors having an opening in excess of 2 inches are deficiencies.
Make necessary adjustment or replace door tomeet the required tolerance.
None.
Exclusions
6.2 GARAGE DOORS
Garage door fails to operate or fit properly.
Deficiency
Garage door fails to operate, or garage doors that do not operate and fit the door opening within themanufacturer’s installation tolerances, are deficiencies. Some entrance of the elements can be expected under heavy weather conditions and is not considered a deficiency.
Construction Performance Guidelines Builder/Seller Responsibility
Make necessary adjustments tomeet themanufacturer’s installation tolerances.
No adjustment is required when cause is determined to result fromanyone but builder/seller’s , or builder/seller’s subcontractors’, installation of an electric door opener.
Exclusions
6.3 WOOD, PLASTIC ANDMETALWINDOWS: INTERIOR AND EXTERIOR
Window is difficult to open or close.
Deficiency
Construction Performance Guidelines Builder/Seller Responsibility
Windows should require no greater operating force than that described in themanufacturer’s specifications.
Correct or repair as required tomeet manufacturer’s specifications.
None.
Exclusions
Double hung windows do not stay in place when open.
Deficiency
Construction Performance Guidelines Builder/Seller Responsibility
Double hung windows are permitted tomove within a 2 inch tolerance, up or down when put in an open position. Any excessive movement exceeding the tolerance is a deficiency. Adjust sash balances one time only during the workmanship warranty term . Where possible, builder/seller will instruct you on the method of adjustment for future repair.
None.
Exclusions
Condensation or frost onwindow frames and glass.
Deficiency
Construction Performance Guidelines Builder/Seller Responsibility
None. No coverage.
None.
Window glass and frames will collect condensation on the frame and glass surface when humidity and temperature differences are present. Condensation is usually the result of temperature/humidity conditions in the home.
Exclusions
6.4 HARDWARE
A doorknob, deadbolt or lockset does not operate smoothly.
Deficiency
Construction Performance Guidelines Builder/Seller Responsibility
A doorknob, deadbolt or lockset should not stick or bind during operation.
Adjust, repair or replace knobs that are not damaged by abuse, one time only, during the workmanship warranty term .
None.
Exclusions
2-10 Home BuyersWarranty | US_W.DS.Sv1_12_2018
Made with FlippingBook - Online Brochure Maker