Type C PORCELAIN Cutouts (Standard, Linkbreak, Loadbreak) and Cutout-Arrester Combinations (10A)

All Type C Cutouts meet or exceed ANSI/NEMA specifications.

Type C STANDARD Cutout

Specifications and Ordering Information 15 kV - 110 kV LIW (BIL)  —  RUS Listed

See page 10A-15 for Accessories.

*Option suffixes below  1  2 3  1  2 3  1  2 3  1  2 3

Continuous Current (Amps)

Interrupt Capacity (Asym Amps)

Maximum Design Voltage

Replacement Fusetube Cap P7001535P E7001767P E7002146P P7001535P

Arc Shorten- ing Rod No

Nominal System Voltage Thru 14.4 kV Thru 14.4 kV Thru 14.4 kV Thru 14.4 kV

Leakage to Ground Metal to Metal

*Base Catalog No.

*Weight (lb./kg.)

100 100 200 300

10,000  16,000  12,000    12,000**

15 kV 15 kV 15 kV 15 kV

8.7" 8.7" 8.7" 8.7"

220 mm 220 mm 220 mm 220 mm

C710112 C710114 C710143 C710133

14.23 /6.45 14.43 /6.55 15.03 /6.82 14.53 /6.59 17.73 /8.04 17.03 /7.72 17.73 /8.04 17.23 /7.82

Yes ‡ Yes ‡ N/A

27 kV - 125 kV LIW (BIL)  —  RUS Listed 27 kV 27 kV 27 kV 27 kV 100 100 200 300 Thru 24.9 kV Thru 24.9 kV Thru 24.9 kV Thru 24.9 kV C710211 C710213 C710242 C710233 1  2 3  1  2 3  1  2 3  1  2 3 27 kV - 150 kV LIW (BIL)  —  RUS Listed No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV C710311 C710313 C710342 C710333 27 kV 27 kV 27 kV 27 kV 100 100 200 300  1  2 3  1  2 3 1  2 3  1  2 3 36 kV - 170 kV LIW (BIL)  —  RUS Listed C710613  1  2 3 36 kV 100

  8,000  12,000  10,000   12,000**

12.6" 12.6" 12.6" 12.6"

320 mm 320 mm 320 mm 320 mm

P7001535P E7001768P E7002479P P7001535P

No Yes ‡ Yes ‡ N/A

22.63/10.26

P7001535P

   8,000 

17.3"

440 mm

No

E7001768P

22.83/10.36

12,000

17.3"

440 mm

Yes ‡

E7002479P

23.43/10.63

10,000

17.3"

440 mm

Yes ‡

P7001535P

23.03/10.45

   12,000**

17.3"

440 mm

N/A

Thru 34.5 kV No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV Thru 34.5 kV

25.43/11.54

Yes ‡

12,000

26"

660 mm

E7001743P

200

 1  2 3

27 kV

25.83/11.72

Yes ‡

12,000

C710643

26"

660 mm

E7002117P

300

1  2 3

36 kV

25.43/11.54

N/A

   12,000**

C710633

26"

660 mm

P7001535P

NOTE: 26" fuse links are recommended.

36 kV 36 kV - 170 kV LIW (BIL)  —  RUS Listed C710713  1  2 3 100

12,000

Thru 34.5 kV No Restrictions thru 24.9 kV; † 26.4 thru 34.5 kV Thru 34.5 kV

720 mm

30.73/13.94

E7001743P

Yes ‡

28.4"

27 kV

200

 1  2 3

12,000

720 mm

31.13/14.12

E7002117P

Yes ‡

C710743

28.4"

36 kV

300

1  2 3

   12,000**

720 mm

30.73/13.94

P7001535P

N/A

C710733

28.4"

NOTE: 26" fuse links are recommended.

*Adjust total weight when selecting Options below. ** Momentary rating — Solid blade ‡ Must use removable buttonhead fuse links. † For application on single-phase to neutral or three-phase solidly-grounded wye-connected circuits where recovery voltage does not exceed the maximum-design voltage of the device.

*Option Suffix 1 Terminal Variations

No option (may not be used with Z in Option 2) Mechanical Assist Fuse- holder (may not be used with Blank in Option 2) *Option Suffix 3 Mechanical Assist Fuseholder Suffix 3 Blank M Description

*Option Suffix 2 Bracket Variations

*Weight (lb./kg.)

Suffix 2 B

*Weight (lb./kg.) 2.84/1.29

Suffix 1

Description NEMA Heavy Duty “B” bracket for crossarm (1 1 / 2 " bolt) Extended type bracket for crossarm (Horizontal section is 2 5 / 8 " longer than Type B bracket) D-shape bracket (pole) No bracket (must be used with M in Option 3) No bracket (cannot use with M in Option 3) Easy-On bracket (Height: 4 1 ⁄ 8 " to 5 5 ⁄ 32 ", Width: 2 3 ⁄ 4 " to 4")

Description

P E L R

Parallel-groove clamps Small eyebolts Large eyebolts Lower PG Clamp Rotated 90°

0.33/0.15 0.16 /0.07 0.31/0.14 0.33/0.15

3.75/1.70

X

Fargo cutout cover (available for 15 kV

D Z

7.67/3.48 –––

Must specify one selection for Option 1.

F

only) (may not be used with Blank in Option 2)

–––

Blank

V

2.9/1.32

Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com

Page 6

January 2014