neocube Operating and installation instructions - models P/C

Set the adjustable feet to such a height that the bench element can be slid under the door frame (bench in middle = 4 adjustable feet, bench on side = 2 adjustable feet). Carefully lift the bench element onto the base plate and slide back evenly. Position as follows: : - Bench in middle = flush with the door frame at the front and same distance at the sides - Bench on side = front and short side flush with the door frame The bench element with the supplied fixing screws with washers can now be loosely attached (only position the screws) from underneath to the front (see arrow). The screws will be tightened or adjusted at a later stage (see point 17)..

When installing the bench element, (2) screws for fixing are used. The bench element is adjusted as follows: - Bench in middle = four adjustable feet - Bench on side = two adjustable feet and adjustment screws The adjustment screws are already in the base plate.

Locating screw with washer

Adjustment screw

neocube P / C – Operating and installation instructions

23