neocube Operating and installation instructions - models P/C

Emptying the ash pan Please note that burning embers can remain in the ash pan for several days after the fire has gone out. Therefore, only empty the ashes into non-flammable containers!

To empty the ash pan, fold the grate upwards using the hook supplied. Then close the ash pan with the ash pan cover and lift it up and out.

Ä Ä Attention : Never heat the fireplace without ash pan!

Cleaning the ceramic cladding Ceramic is not porous or open-pored like natural stone for instance. Therefore, impurities or strongly co- loured liquids cannot seep into the surface. The CB cleaning agent facilitates maintenance and provides your ceramic cladding with optimum protection from soiling.

Notes: Do not use strong acids (e.g. hydrochloric acid, sulphuric acid, hydrofluoric acid, ammonium fluoride) or strong alkalis (e.g. caustic soda, potassium hydroxide). Use a solvent-free dirt eraser on the smoo- th surfaces to remove any residual dirt that cannot be removed with a sponge. Ä Ä Attention: Do not use products containing hydrofluoric acid or its derivatives.

11. Maintenance

Maintenance work must only be carried out after the wood-burning stove has completely cooled down.

General Maintenance work must only be carried out when the wood-burning stove is cold. A minimum of daily maintenance/cleaning of the wood-burning stove is required. It is best to use a vacuum cleaner with a small mouthpiece and a soft brush to vacuum the outside of the wood-burning stove or clean it with a soft, dry cloth or soft duster. You can also dust the wood-burning stove with a soft, dry cloth or a soft hand brush. But remember only to do so when the stove is cold. Do not use water, alcohol or any cleaning agents as this will damage the paint.

neocube P / C – Operating and installation instructions

36