2019-2020 Purchasing Guide Volume 1

RAYPAK COMMERCIAL HEATERS

COMMERCIAL HEATERS

Raypak XTherm® Gas Heater The Raypak XTherm will precisely heat your pool. Utilizing the latest technology for the combustion-components, the optimum fuel-air ratio is maintained throughout the entire range of the load-tracking operation. The XTherm automatically self-tunes to accommodate the widest range of gas supply pressures. The high quality integrated blower-gas valve is self-correcting and allows smooth operation with fluctuating gas supply pressures. The Raypak XTherm is cutting edge technology with atmospheric simplicity. • 97% thermal efficiency at full fire in pool applications • Minimum continuous inlet water temperature (50°F) • Small footprint, less than 11 square feet • AB 1953 low lead certified • On-board diagnostic center, real English, no codes • All models indoor/outdoor construction • Complete cabinet protects all controls and wiring • Low NOx - Less than 20ppm • Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.) • PVC vent capable - optional at time of order • 3 models from 1,000,000 to 2,000,000 BTUH

S/O WHP1005 999k BTU Nat. gas S/O S/O WHP1505 1,500k BTU Nat. gas S/O S/O WHP2005 1,999k BTU Nat. gas S/O

XTHERM ® Professional Indirect Pool Heater

The standard configuration utilizes a highly corrosion resistant Cupro-Nickel exchanger with an option to upgrade to Titanium for the ultimate in corrosion resistance. The indirect heat exchanger keeps the boiler safe from corrosive pool water. The system arrives completely assembled, just connect, fill and flip the switch! No onsite soldering or assembly needed. Easy to install and commission, unit comes standard with a 7" touchscreen display and Raypak’s Versa IC® control system. Full diagnostics with history and Modbus RTU BMS port. Economical to vent, unit comes standard with PVC vent connections and

limit. Full electronic load tracking with 7:1 turndown. S/O XTHERM® Professional Indirect Pool Heater

loop w/ system Pre-plumbed boiler pump and expansion tank

Condensate neutralizer

• Corrosion Resistant Heat Exchanger • Time/Labor Savings • Controls Made Easy • 96% Thermal Efficiency

Professional Indirect Pool Heater Model 1005A shown

Model Number

Full Input BTUH

Indoor Stack Dia.

1005A

999,000

6"

Cupronickel, or titanium indirect heat exchanger

1505A

1,500,000

8"

Reversible PVC venting

2005A

1,999,999

8"

53

Order by phone at 1.800.LESLIES (537.5437) option 4 | email at commercial@lesl.com