Specialty Furniture Catalogue 2024-1

Casegood Specifications




Top Construction: One piece 3D laminate Thermovinyl wrapped over top and 4 edges, with radius corners and edges. Contract grade MDF core with minimum density of 45 lbs. Backer, white melamine


End Panel Construction: TFL (Thermally Fused Low-pressure laminate/ melamine) panel with contract grade particle board, 45 lbs. minimum density. Edges are banded with PVC to seal all exposed core and to prevent moisture absorption.


Drawer Front and Kick Plate Construction: One piece 3D laminate Thermovinyl wrapped over drawer faces, door faces and kick plate with Contract Grade MDF, 45 lbs. minimum density core.


Drawer Construction: (1) Drawer boxes-four-sided, double dowelled, glued, and screwed jointed with a recessed 1/8” fiberboard bottom. Each box shall be vinyl wrapped and moisture sealed. Bottom in box will be glued and stapled to drawer box.( 2 ) With epoxy coated metal glides, drawer bottom and back are 1/2” thick white melamine.


Doors: Soft closed European hinges used to prevent sudden slamming noise with varying degrees of swing dependent upon the case.


Backs : (Bedside cabinet and Dresser) Full 3/4” thick white melamine for weight counter balance. (Wardrobe)All shall have a 3/4” thick top rail that allows for installation to wall and combo of 3/4” and 1/8” thick back for rigidity.


Rear Casters and Front Glides: All units shall have two rear nylon casters for ease of mobility and two front adjustable height glides for unit levelling.


All units are vented in the back to assist in removing moisture and odors.


All edges and corners are radius or softened to prevent serious Injuries In case of a fall and also premature wear and tear.


All tops, drawers, doors and kick plate can be easily replaced in the field.


1.866.559.5099 www.specialtyfurniture.ca

Made with FlippingBook Annual report